1 - 10 of 12 Search Results for 0175
|
|
2.
vitesse_quick_setup
(PAGE 2 OF 2)
|
|
|
... , or if a fault message is displayed, refer to Section Five of the Operator's manual. Copyright© Coherent Inc., 4/99. All rights reserved. P/N: 0175-814-00, Rev. A Figure 1. Cooling Connection Hardware Figure 2. Chiller Hardware Installed Figure 3. Head Hardware Installed Figure 4. Chiller Controls ON ...
|
|
|
|
|
3.
Diamond_Integrators_Guide_RevAA
(PAGE 5 OF 56)
|
|
... Mounting Plate . 23 10. Cross Section of Air Ejector for Protecting Bending Mirror. 27 11. Installation Dimensions for Coherent CQE Module 0175-989-00. 28 12. Installation Dimensions for Coherent Isolator/CQE Assembly 0175-990-00 . 29 13. Beam Profile . 30 14. Simple Beam Expander . 34 15. Galilean ...
Related Searches: gem-30
|
|
|
|
|
4.
Verdi_V8-V10_Preinstallation
(PAGE 18 OF 18)
|
|
|
Verdi V-8/V-10 Lasers Preinstallation Manual © Coherent, Inc. 09/2005, Printed in the U.S.A. Part No. 0175-452-00, Rev BB
|
|
|
|
|
5.
Diamond_Integrators_Guide_RevAA
(PAGE 34 OF 56)
|
|
|
... it can do any damage. Isolators may have to absorb substantial power, requiring them to be water-cooled. The isolator/CQE assembly, part number 0175-990-00, (Figure 12) should be located as near the focusing lens as possible to protect all the beam delivery optics. The CQE and Figure 11. Installation ...
|
|
|
|
|
6.
Diamond_Integrators_Guide_RevAA
(PAGE 35 OF 56)
|
|
|
Beam Delivery 29 isolators referred to are for operation at 10.6 m. For operation at 9.4 m use CQE part number 0175-989-01 and isolator part number 0175-990-01. Damage to the laser due to back reflection is not covered by warranty, so the system designer should protect against it. Figure 12. Installation ...
|
|
|
|
|
7.
Innova300C_fredmotofred_preinstallation
(PAGE 32 OF 32)
|
|
|
Innova® 300C FreDTM / MotoFreDTM Ion Laser Preinstallation Manual © Coherent, Inc., 09/2002, Printed in the U.S.A. Coherent Part Number: 0175-283-00, Rev BA
|
|
Coherent Contact Information