1 - 10 of 288 Search Results for 100 watt
|
|
|
1.
Fabric Marking with CO 2 Lasers
|
|
... note, we show the results of CO 2 laser marking of blue denim. Laser Used: GEM-Series and C-Series Process: The 10.6-µm output beam from a G-100, 100-watt CO 2 laser was directed into a scanner-based marking system. The laser was used to burn dye from blue denim. Process speeds of up to several meters ...
Related Searches: g-100
|
|
|
|
|
2.
G Series Packages
|
|
2 pulsed laser. The system consists of a 50 or 100 Watt laser resonator and solid-state RF amplifier integrated within an all-metal enclosure. Operation "> G Series Packages Click here for Coherent Technical Support contact information. Superior Service Solutions 40+ years of experience Supporting ...
Related Searches: rf amplifier
|
|
|
|
4.
makingtheirmarkinchina7-06-ils
(PAGE 3 OF 3)
|
|
|
... the type of machines that the market will support. For example, laser engraving can be successfully performed with lasers rated anywhere from 40 watts to 600 watts. Throughput increases with laser power, but so does system cost. Because cost is such a big factor to small manufacturers, most of the market ...
|
|
|
|
|
5.
Plastic Bottle Marking with CO 2 Lasers
|
|
... a PET (polyethylene terephthalate) water bottle with a sealed, CO 2 laser. Laser Used: GEM-Series and C-Series Process: The output beam from a GEM-100 CO 2 laser operating at 10.6 µm was directed into a galvanometer scanner equipped with a 100-mm focal length lens. The theoretical spot size at the ...
Related Searches: plastic welding
|
|
|
|
|
6.
CO 2 System Troubleshooting
|
|
... DC power supply Diamond digital interface (DDI) board Internal heat exchanger G Series Packages Click here for a picture of the Diamond G-50/100 OEM laser system The Diamond G-50/100 laser is an RF excited, sealed-off industrial CO 2 pulsed laser. The system consists of a 50 or 100 Watt laser resonator ...
Related Searches: k-150 | diamond k-250 | rf amplifier | diamond k-500
|
|
|
|
|
7.
Single Bar Package
|
|
|
... of this product at any time without notice. For detailed specifications, see part number. Name Description 9015-1 Single Bar Package Up to 100 watt CW Literature & Documentation . Keep Informed Contact Information Printable ...
|
|
|
|
|
8.
FlexibleFoodPackagingRev2
(PAGE 1 OF 3)
|
|
|
... barrier layer, in contact with the food, and the graphics-grade PP is the outer, printed layer. Total film thicknesses are usually on the order of 100 microns, even for stiffer stand-up pouches. In the converting process, these films are initially handled on a fast-moving master roll and lasers may ...
|
|
|
|
|
9.
LTJ_Laser_Direct_Machining_0308
(PAGE 2 OF 2)
|
|
... HaZ (heat affected zone). these two applications are best supported with lasers (such as Cohrerent's aVia and PriSma families) that combine high (100 kHz) pulse repetition rate necessary for economic scribing with a short pulse duration that results in a minimized HaZ. Laser Direct Patterning of Flex ...
Related Searches: laser scribing
|
|
Coherent Contact Information