Superior Reliability & Performance

• Lasers and Laser-based Systems
• Laser Measurement and Control
• Precision Optics
• Related Accessories

---

1.    MicromachiningWithTalisker Best match in this PDF  |  All matches in this PDF …produced in silicon with picosecond lasers with wavelengths of 1064 nm, 532 nm and 355 nm. Figure 2 shows a trepanned hole in silicon using 355 nm pulses. A lower throughput is required than for percussion drilling and deeper vias can be drilled at 355 and 532 nm than 1064 nm due to the higher absorption… Related Searches: silicon drilling | glass drilling | high-aspect-ratio laser micro-machining | ps laser

2.  Coherent Inc. Talisker Lasers Enable Industrial Applications …Talisker 500 1064-25 Data Sheet Talisker 500 355-10 Data Sheet Talisker 500 532-15 Data Sheet Talisker Ultra 1064-16 Data Sheet Talisker Ultra 532-8 Data Sheet Talisker Ultra 355-4 Data Sheet Talisker Brochure Flat Panel Display Defect Repair Using High Peak-Power Picosecond Lasers A Unique Laser Process… Related Searches: talisker 355-4 | talisker ultra 355-4 | talisker | talisker 500

3.  Commercial Applications of High Power Picosecond Lasers  (PAGE 1 OF 5) …-Based, High Average Power Picosecond Laser 1 Micromachining of Glass Using a Fiber-Based, High Average Power Picosecond Laser 1. Introduction Lasers are well established in many industries due to advantages such as the non-contact nature of the laser-material interaction, their… Related Searches: glass drilling | picosecond

4.    PrecisionMaterialsProcessingwithTaliskerLasers1 Best match in this PDF  |  All matches in this PDF …shown that extremely smooth sidewalls can be produced in silicon with picosecond lasers with wavelengths of 1064 nm, 532 nm and 355 nm - see Figure 5 and 6. Figure 5. Trepanned hole in silicon using 355 nm pulses However, since the laser beam must be trepanned (moved in a circular path), the throughput is… Related Searches: nanosecond | pulse fiber laser | laser glass cutting | high-aspect-ratio laser micro-machining

5.    Talisker Glass Micromachining Best match in this PDF  |  All matches in this PDF …Using a Fiber-Based, High Average Power Picosecond Laser 1 Micromachining of Glass Using a Fiber-Based, High Average Power Picosecond Laser 1. Introduction Lasers are well established in many industries due to advantages such as the non-contact nature of the laser-material interaction, their flexibility… Related Searches: laser glass cutting | glass drilling | glass cutting | talisker

6.  (Microsoft Word - Coherent - Laser Sources For Next-Generation Solar Cells -\205)  (PAGE 3 OF 10) …interconnection across the panels. Laser types used for these applications have been dominated by nanosecond diode-pumped solid-state (DPSS) sources operating at 1064 nm (IR), 532 nm (green) and 355 nm (UV). This is confirmed when looking at the revenue split for lasers sold into the solar industry…

7.    ILS PicosecondLasers Best match in this PDF  |  All matches in this PDF …the center. The high peak power of picosecond lasers can avoid this problem, and since glass is essentially transparent to visible wavelengths, 1064 nm offers the highest average processing power for maximum removal rates whereas the UV Page 5 of 7Picosecond laser enables new high-tech devices 5/15/2012…

8.    Talisker flat panel whitepaper final Best match in this PDF  |  All matches in this PDF …nm, gives acoustic/thermal response times of ~15 ps and 42 ps, both of which are greater than the Talisker laser pulse duration of 10 ps. Therefore, picosecond pulses are a good choice for selective removal of chromium thin films. Figure 7 shows selective removal of 70 nm chrome from glass using 1064… Related Searches: aom | talisker | picosecond laser

9.    EnergyMaxSensors UserManual RevAB Best match in this PDF  |  All matches in this PDF …power lasers operating at low repetition rates, such as those based on Nd:YAG, Ruby, Ho:YAG, and Erbium. The YAG/Harmonics sensor can work at 1064 nm, 532 nm, 355 nm, and 266 nm without the need to change diffusers or any other accessories. The J-25MB-IR sensor can operate throughout the 694 nm to 2.1… Related Searches: field max ii top power energy meter | field max ii top | db25 | db-25 smart

10.  MicromachiningWithTalisker.pdf  (PAGE 1 OF 1) … that extremely smooth sidewalls can be produced in silicon with picosecond lasers with wavelengths of 1064 nm, 532 nm and 355 nm. Figure 2 shows a trepanned hole in silicon using 355 nm pulses. A lower throughput is required than for percussion… Related Searches: high-aspect-ratio laser micro-machining | silicon drilling | ps laser

---

Search Suggestions: silicon drilling | talisker 355-4 | talisker ultra 355-4 | glass drilling | picosecond | nanosecond | laser glass cutting | pulse fiber laser | talisker | talisker 500

Page 1 2 3 4 5 6 7 8 9 10 of 10 | Next

Site Search by