Search Results

1 - 12 of 20 Products for '266 Pulsed' Page 1 of 2 |

266 Pulsed

Avia preinstall.book

Avia preinstall.book

…COMMANDS ARE FOR PULSE DELETE AND THERMEQ FUNCTIONS:
PULSE DELETE=n
PD=n
This command changes the PULSE CONTROL mode of operation
and is NOT recommended for AVIA 266.
n=1 Pulse Delete On
n=2 ThermEQ On
n=3 PulseEQ On
n=4 PulseTrack On
PULSE DELETE AUTO…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

pulse or very high peak fluences. The J-50MB-YAG sensor is rated to withstand the following energy densities: Wavelength Maximum Energy Density 266 nm 1 J/cm 2 355 nm 0.8 J/cm 2 532 nm 2.8 J/cm 2 1064 nm 14 J/cm 2 The J-50MB-IR is specifically designed for high damage threshold when used with pulsed

AVIA NX nanosecond laser

AVIA NX nanosecond laser

…highest UV power – up to 40 watts – and the highest green power – up to 65 watts. And with the green AVIA NX, you even have the choice of high pulse energy or high repetition rate to perfectly match the power characteristics to your application. Integrated Laser Head. With AVIA NX, there is no…

compatibility matrix 02

compatibility matrix 02

…V-Series, G-Series (> 10 W) 532 nm FieldMaxII-TO PM30
Verdi IR 1064 nm FieldMaxII-TO PM30
Diode-Pumped Solid-State (pulsed)
AVIA (< 10 W) 266, 355 nm FieldMaxII-TO PM10X
AVIA (10 to 30 W) 355, 532 nm FieldMaxII-TO PM30X
AVIA NX (> 30 W) 355, 532 nm FieldMaxII-TO…

COHR RLScatalog2020 interactive.pdf

COHR RLScatalog2020 interactive.pdf

pulse shape de-convolution factor (0.7) is used to determine the pulse width from an autocorrelation signal measured by a Coherent SSA (Single-Shot Autocorrelator).
3 Contrast ratio is defined as the ratio between the peak intensity of the output pulse to the peak intensity of any other pulse

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…577 FieldMaxII-TO PM10
Genesis Taipan 460, 480, 488, 532, 561, 577 FieldMaxII-TO PM10
MBD 200 455 to 1070 FieldMaxII-TO PS10
MBD 266 266 FieldMaxII-TO PM10X or PS103
Paladin 355 355 FieldMaxII-TO PM10X
Sapphire LP Family 458, 460, 488, 514, 532, 561, 568, 588 FieldMaxII-TO…

2009 LMCCatalog86.pdf

2009 LMCCatalog86.pdf

…Power Meter Power Sensor
Azure 266 FieldMaxII-TO PM10X or PS101
Compass 1064 1064 FieldMaxII-TO PM10
Compass 115M, 215M, 315M 532 FieldMaxII-TO PS10
Compass 561 561 FieldMaxII-TO PS10
Genesis 355, 532 FieldMaxII-TO PS10
MBD 266 266 FieldMaxII-TO PM10X or PS101

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…(mm) 35 30
Max. Avg. Power (W) 20 15
Max. Pulse Width (µs) 340 1000
Max. Rep. Rate (pps) 50 30
Max. Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns)
2.8 (at 532 nm, 10 ns)
0.75 (at 355 nm, 10 ns)
1.0 (at 266 nm, 10 ns)
> 100 (at 2940 nm, 100 µs)
Sensor…

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

…such as short UV wavelength, and short pulse length,
combined with high energy and power, are well suited for the III-V material systems commonly
used in LED manufacturing. The 248 nm excimer in particular far exceeds the performance of
266 nm or 213 nm solid-state lasers. Given this,…

CMM 8.2.indd

CMM 8.2.indd

…structuring
processes are based on pulsed lasers,
because pulsed operation enables laser
energy to be applied in a very controlled
dosage. This again helps to minimise the HAZ.
Depending on process needs, an industrial
laser pulse can last from milliseconds down
to…

EnergyMax-USB-RS-Sensors-Guide FORMFIRST.pdf

EnergyMax-USB-RS-Sensors-Guide FORMFIRST.pdf

…Power (W) 20 15
Maximum Pulse Width (µs) 340 1000
Maximum Repetition Rate (pps) 50 30
Maximum Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns) >100 (at 2940 nm, 100 µs)
2.8 (at 532 nm, 10 ns)
0.75 (at 355 nm, 10 ns)
1.0 (at 266 nm, 10 ns)
Detector Coating…

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

…>40 µJ >70 µJ V
FH Package FHI 400 to 480 nm H
FHS 290 to 400 nm >5 µJ >10 µJ H
SHSF Package SH (SFI) 266 to 295 nm H
SH (SFS) 240 to 266 nm >3 µJ >8 µJ H
NDFG Package NDFG1 2.6 to 11 µm5 >2 µJ at 4 µm >8 µJ at 4 µm H
>0.5 µJ at 9 µm >1.5…