Ask a Question
Coherent
Search Results
37 - 48 of 259 Products for '266' Page 4 of 22 |
Related Categories: 266 Nm Laser | Azure 266 | 355 Nm Laser | Avia 355 X | Avia

266

Avia preinstall.book

Avia preinstall.book

AVIA 266 Laser Preinstallation Manual 14 EXTERNAL COMPUTER CONTROL AVIA Computer Interface This section provides information on interfacing the AVIA 266 laser to an external computer through the RS-232 connector on the rear of the power supply. The RS-232 interface is based on a set of laser control…

COHR Azure DS 0717 4.pdf

COHR Azure DS 0717 4.pdf

…for an easy integration into an industrial environment. It emits at 266 nm wavelength with 230 mW output power. Azure is based on highly successful Verdi CW green laser. The single-frequency emission from Verdi is converted into 266 nm by using a high-efficiency resonant frequency doubling cavity.…

Avia preinstall.book

Avia preinstall.book

…a suitable location and operating environment for optimum AVIA 266 performance. Installation Initial installation should be performed by an authorized Coherent service engineer or by Coherent trained personnel. The AVIA 266 must be powered up and set to "STANDBY" when not in use. The system…

Avia preinstall.book

Avia preinstall.book

…a suitable location and operating environment for optimum AVIA 266 performance. Installation Initial installation should be performed by an authorized Coherent service engineer or by Coherent trained personnel. The AVIA 266 must be powered up and set to "STANDBY" when not in use. The system…

Avia preinstall.book

Avia preinstall.book

…a suitable location and operating environment for optimum AVIA 266 performance. Installation Initial installation should be performed by an authorized Coherent service engineer or by Coherent trained personnel. The AVIA 266 must be powered up and set to "STANDBY" when not in use. The system…

Avia preinstall.book

Avia preinstall.book

AVIA 266 Laser Preinstallation Manual 12 Figure 4. AVIA External Interface Table 7. Suggested Mating Connectors to Interface with the AVIA Laser System CONNECTORS ON POWER SUPPLY MATING CONNECTORS (SUPPLIED BY USER) CONNECTOR NAME CONNECTOR TYPE MANUFACTURER PART NUMBER Pulse Trigger In BNC (Jack)…

Avia preinstall.book

Avia preinstall.book

AVIA 266 Laser Preinstallation Manual 12 Figure 4. AVIA External Interface Table 7. Suggested Mating Connectors to Interface with the AVIA Laser System CONNECTORS ON POWER SUPPLY MATING CONNECTORS (SUPPLIED BY USER) CONNECTOR NAME CONNECTOR TYPE MANUFACTURER PART NUMBER Pulse Trigger In BNC (Jack)…

Avia preinstall.book

Avia preinstall.book

AVIA 266 Laser Preinstallation Manual 12 Figure 4. AVIA External Interface Table 7. Suggested Mating Connectors to Interface with the AVIA Laser System CONNECTORS ON POWER SUPPLY MATING CONNECTORS (SUPPLIED BY USER) CONNECTOR NAME CONNECTOR TYPE MANUFACTURER PART NUMBER Pulse Trigger In BNC (Jack)…

Avia preinstall.book

Avia preinstall.book

External Computer Control 15 ECHO Mode The AVIA 266 provides an echo mode in which each character transmitted to the laser is echoed to the host. This feature can be turned on or off using the ECHO command (refer to Table 11). PROMPT Mode The AVIA 266 provides an prompt mode for terminal operation…

Book.book

Book.book

…nm 266 nm 532 nm 1,064 m 10,600 m 248 nm Note: current operating wavelength is not editable. Current Sensor Min: 248 nm Op: 1.064 m Cal: 514 nm Max: 10,600 m Figure 4-38. SETUP: Edit Wavelength Table (Adding a Wavelength) SETUP: Edit Wavelength Table Turn knob to select wavelength: CANCEL 193 nm 266

Book.book

Book.book

…nm 266 nm 532 nm 1,064 m 10,600 m 248 nm Note: current operating wavelength is not editable. Current Sensor Min: 248 nm Op: 1.064 m Cal: 514 nm Max: 10,600 m Figure 4-47. SETUP: Edit Wavelength Table (Adding a Wavelength) SETUP: Edit Wavelength Table Turn knob to select wavelength: CANCEL 193 nm 266

Avia preinstall.book

Avia preinstall.book

External Computer Control 15 ECHO Mode The AVIA 266 provides an echo mode in which each character transmitted to the laser is echoed to the host. This feature can be turned on or off using the ECHO command (refer to Table 11). PROMPT Mode The AVIA 266 provides an prompt mode for terminal operation…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions