Search Results

1 - 12 of 13 Products for '320 nm' Page 1 of 2 |

320 nm

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…for the
spectral region 190 nm to 355 nm (see Laser-Grade Attenuation Optics for
Cameras on page 112).The Beam Intensity Profiler BIP-5000Z has a zoom
magnification range of 6:1 to 1:1 and accepts beams up to 30 mm by 40 mm
from 10 nm to 320 nm. It comes with the mount shown.…

compatibility matrix 02

compatibility matrix 02


Genesis 355 355 nm FieldMaxII-TO PS10
Genesis 460 to 639 nm FieldMaxII-TO PM10
Ion
Innova (< 1 W) 200 to 1100 nm FieldMaxII-TO PS10
Innova (> 1 W) 200 to 1100 nm FieldMaxII-TO PM10
Pulsed / Dye
ScanMatePro (discontinued 2007) 320 to 860 nm FieldMaxII-TO PM10…

LaserCam-HR II User Manual

LaserCam-HR II User Manual

…10,000 times saturation power density or 32 mJ/cm2 at 1064 nm.
Saturation
Table 4-2. Saturation
Wavelength On Array On LDFP
633 nm (CW) 16.0 µW/cm2 40.0 mW/cm2
1064 nm (CW) 320.0 µW/cm2 800.0 mW/cm2
1064 nm (Pulse) 3.2 µJ/cm2 8.0 mJ/cm2
Table 4-3. LaserCam-HR II…

Diode Lasers Enable Diverse Therapeutic Applications

Diode Lasers Enable Diverse Therapeutic Applications


and near-IR light, from approximately
320 to 1200 nm. Conversely, blood absorbs most strongly at wavelengths below 600 nm, and the water that is omnipresent in soft tissue starts to absorb
strongly at wavelengths longer than
1100 nm. There is thus a wide potential
wavelength…

COHR ChameleonVUE DS 0817 4.pdf

COHR ChameleonVUE DS 0817 4.pdf

…Curve
(Ultra II Pump)
Power (mW)
Wavelength (nm)
SHG
0
200
400
600
800
1000
1200
1400
1600
1800
320 360 400 440 480 520 560
Power (mW)
Wavelength (nm)
0
100
200
300
400
500
600…

AVIA 355-28 DS

AVIA 355-28 DS

…µrad/°C ambient temp.
Laser Beam Polarization Ratio >
_100:1 linear
Laser Beam Polarization Direction Horizontal, ±2º
940 nm Pump Leakage Power (mW) <
_10 avg.
Amplified Pulse Energy to Unamplified Pulse Energy Ratio >
_1000:1
Amplified Pulse Energy…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…< 320
Wavelength Range (µm) 0.266 to 2.1 0.5 to 3.0
Max. Beam Size (mm) 35 30
Max. Avg. Power (W) 20 15
Max. Pulse Width (µs) 340 1000
Max. Rep. Rate (pps) 50 30
Max. Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns)
2.8 (at 532 nm, 10 ns)
0.75 (at 355 nm, 10…

Laser Focus World - September 2015

Laser Focus World - September 2015

…25.6
mm2. Second is its small pixel size, which
measures at an 80 µm pixel pitch, resulting in the highest resolution thermal imager (320 × 320 pixels) that Ophir-Spiricon
has produced. Finally, its increased sensitivity at 1.0 mW/cm2 (at a 25 Hz chop
rate) provides better…

EnergyMax-USB-RS-Sensors-Guide FORMFIRST.pdf

EnergyMax-USB-RS-Sensors-Guide FORMFIRST.pdf

…<240 <320
Wavelength Range (µm) 0.266 to 2.1 0.5 to 3.0
Maximum Beam Size (mm) 35 30
Maximum Average Power (W) 20 15
Maximum Pulse Width (µs) 340 1000
Maximum Repetition Rate (pps) 50 30
Maximum Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns) >100 (at 2940 nm,

COHR Monaco1035 DS 0318 5.pdf

COHR Monaco1035 DS 0318 5.pdf

…industrial femtosecond laser with a MOPA architecture. Designed for high-uptime in 24/7 applications, the laser family provides >80 J/pulse at 1035 nm. Standard repetition rates up to 50 MHz at 60 W enable current and future throughput requirements in materials processing and microelectronics…

COHR MonacoSmartCleave DS 0318 4.pdf

COHR MonacoSmartCleave DS 0318 4.pdf

…Monaco SmartCleave
1035-80-60
Fundamental Center Wavelength (nm) 1035 ±5 1035 ±5
Output Power (W) 40 60
Energy (µJ) 40 (at 1 MHz) 80 (at 750 kHz)
Seeder Burst Mode (µJ) (max. energy) >200 >320
Seeder Burst Count (µJ) (max. energy) 5 x 40 4 x 80
Seeder Burst…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…· Internal cooling fan
· CDRH Class IIIb safety compliance option
· Constant power CW
Radius 405-50 635-25 635-25E
Wavelength (nm) 405 ±5 635 +7/-2 635 +7/-2
Power (mW) 50 25 25
Max. Modulation Frequency (Hz) 5 100 100
RMS Noise (10 Hz to 10 MHz) <0.5% <0.5%…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions