Search Results

13 - 24 of 85 Products for '355 10' Page 2 of 8 |

355 10

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…film which is only microns thick. The result is a measurement response time below 10 μs, as compared to over 1 second for traditional thermopiles. Plus, these detectors can operate over a spectral range as broad as 355 nm to 11 μm, and incorporate a large 30 mm x 30 mm active area. The high response…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…on Nd:YAG, Erbium, Ruby and Ho:YAG. The YAG/Harmonics sensor can operate with laser beams up to 35 mm in diameter, and can work at 1064 nm, 532 nm, 355 nm and 266 nm without the need to change diffusers or any other accessories. The J-50MB-IR sensor is similar to the J-50MB-YAG sensor, except that…

Genesis CX-STM

Genesis CX-STM

…Genesis CX STM-Series High-power continuous wave (CW) lasers for life sciences and research applications. Available in 355, 460, 480, 488, 514, 532, 561, 577, 590 nm with up to 10W of output power. The Genesis CX STM-Series is made for end users and OEMs. It is a single transverse mode, TEM 00…

Solar Cell Manufacturing

Solar Cell Manufacturing

…can also be performed simultaneously with groove scribing or Dielectric Ablation. Related Products Verdi G Series Verdi V Series Paladin Advanced 355 Paladin Advanced 532 c-Si Dielectric Ablation Lasers and laser process tools enable highest precision c-Si ablation with minimized sub-surface bulk…

Microelectronics

Microelectronics

…in high-end smart phones. The Coherent Paladin family of lasers is the ideal source for LDI. Related Products Paladin Advanced 355 Paladin Advanced 532 Paladin Compact 355 Laser Crystallization for LTPS Laser crystallization drives faster, brighter displays with HD resolution. Excimer laser powers…

PaladinAdvanced355 DS

PaladinAdvanced355 DS

…mm (4.13 in.) R4 ±0.10 M10x1; 5 mm dp 10 mm (0.4 in.) M5 Ø16 -39 377.4 mm (14.86 in.) 392.4 mm (15.45 in.) 962.4 mm (37.89 in.) 977.4 mm (38.48 in.) 997.4 mm (39.27 in.) 1100 mm (43.31 in.) 1139 mm (44.84 in.) 1168.5 mm (46.0 in.) 150 mm (5.91 in.) 127.27 ±10 mm (5.01 ±.004 in.) 276 mm (10.87 in.)…

PaladinAdvanced355 Datasheet 2017.pdf

PaladinAdvanced355 Datasheet 2017.pdf

…Advanced 355 Datasheet
1 Fixed power.
2 Relative to laser mount.
3 Head temperature is stabilized to ±0.5 35°C by the chiller.
SPECIFICATIONS Paladin Paladin Paladin Paladin
355-8000 355-10000 355-16000 355-24000
Wavelength (nm) 355
Output Power1 (W) >8 >10

COHR MATRIX355 DS 0317 2.pdf

COHR MATRIX355 DS 0317 2.pdf

…control
Input Power Requirements
Input Voltage (VAC) 90 to 240, 50 to 60 Hz
Input Power maximum typical
Power Supply (VA) 750 350
1 AVIA Ultra 2000 compatible beam parameters through internal beam expander (BE).
2 At specified rep. rate.
MATRIX 355 Datasheet

COHR PaladinCompact355 DS 0318 3.pdf

COHR PaladinCompact355 DS 0318 3.pdf

…Wavelength (nm) 355
Output Power (W)
Paladin Compact 355-2000 Air-Cooled
Paladin Compact 355-4000 Air-Cooled
>2
>4
Repetition Rate (MHz) 120 ±2
Pulse Length (ps) 15 at 1064 nm
Spatial Mode TEM00
M2 <1.2
Beam Diameter (mm) 1 ±10%
Beam…

COHR MATRIX355 DS 1118 1.pdf

COHR MATRIX355 DS 1118 1.pdf

…Input Power Requirements
Input Voltage (VAC)
Input Power
Power Supply (VA)
90 to 240, 50 to 60 Hz
maximum typical
750 350
MATRIX 355 Datasheet
1 AVIA Ultra 2000 compatible beam parameters through internal beam expander (BE).
2 At specified rep. rate.

AVIA 355-28 DS

AVIA 355-28 DS

…phone (800) 527-3786
(408) 764-4983
fax (408) 764-4646
e-mail tech.sales@Coherent.com
Benelux +31 (30) 280 6060
China +86 (10) 8215 3600
France +33 (0)1 8038 1000
Germany +49 (6071) 968 333
Italy +39 (02) 31 03 951
Japan +81 (3) 5635 8700
Korea +82…

COHR HyperRapid100 355-SW DS 0716 6.pdf

COHR HyperRapid100 355-SW DS 0716 6.pdf

…(W)
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700 800 900 1000
1064 nm (specification)
1064 nm (typical)
532 nm (specification)
532 nm (typical)
355 nm (specification)
355 nm (typical)