…Galaxy Integrated System. OBIS LG CW Ultraviolet Laser OBIS LG CW Ultraviolet Laser The OBIS LG is the high-power laser of choice with up to 50 mW, and provides 355 nm, OBIS USB interface compatibility, and integrated control electronics, ideal for flow cytometry, particle counting, DNA sequencing,…
…assembly process for optical components. This guarantees best optical alignment and stability over the whole lifetime of the product. Datasheet Matrix 355 Datasheet Matrix 1064 and 532 Datasheet Matrix Accessories Applications Application Process Material Materials Processing Cutting Dicing/Scribing…
…on Nd:YAG, Erbium, Ruby and Ho:YAG. The YAG/Harmonics sensor can operate with laser beams up to 35 mm in diameter, and can work at 1064 nm, 532 nm, 355 nm and 266 nm without the need to change diffusers or any other accessories. The J-50MB-IR sensor is similar to the J-50MB-YAG sensor, except that…
…85 Beam-Pointing Stability in Full PRF range (µrad / °C) <50 Electric Supply 100 to 230 VAC/50 to 60 Hz/2.5 kW 100 to 230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time <40 min from chiller start High Power Industrial…
…of a thermopile with the response speed of a semiconductor photodiode. This high-speed, thin film sensor technology for laser power measurement (50 mW to 15 kW) utilizes a unique thermal flow design enabling fast, high power measurement, with high damage resistance. The sensor is so fast, less…
…Goettingen, Germany Insect (5 mm) global view. Magnification (10x) of the indicated frame in the Insect Global View image: insect leg with hairs. Magnification (one more 10x) of the indicated frame in the Insect Leg with Hairs image: excimer laser machined micro gear (diameter 50 mm) attached to one…
…drawbacks are that this method
cannot process strengthened glass, and the
edges typically show significant chipping
from about 10 m to 50 µm from the
processed edge.
With USP lasers, scribing is most commonly performed with the laser initially
focused on the top surface…
…Beam Quality Parameter (M²) 1.3
Beam Diameter, 1 m in front of laser (mm) 5.0 ±0.5
Beam Divergence, full angle (mrad) 1
Beam Circularity, 1 m in front of laser (%) 85
Beam-Pointing Stability (µrad/°C) 50 (peak-to-peak)
Bore Sight Accuracy
Lateral (mm) (beam to specified…
…in.), 19 in., rack-mountable
Chiller 482 x 177 x 560 mm (19 x 7 x 22 in.), 19 in., rack-mountable
Pump Fiber's Length 5m (16.4 ft.)
Weights
Laser Head 50 kg (110 lbs.)
Power Supply 30 kg (66 lbs.)
Chiller 38 kg + 3 liters coolant (84 lb. + 0.7 gal.)
Utility and…
…355-M1 355-1-60 355-5-50 355-8-50 355-1-60-BE2
Average Power (W) 0.5 at 60 kHz 1 at 60 kHz 5 at 50 kHz 8 at 50 kHz 1 at 60 kHz
Recommended Power Range (%) 70 to 100 50 to 100 50 to 100 70 to 100 50 to 100
Pulse Repetition Rate (kHz) up to 100 up to 100 up to 150 up to 150 up to 100…
…0
50
100
150
0 100 200 300 400 500 600 700 800 900 1000
1064 nm (specification)
1064 nm (typical)
532 nm (specification)
532 nm (typical)
355 nm (specification)
355 nm (typical)
Pulse Repetition Rate (kHz)
Power (W)
0
5
10…
…
355-8-50
MATRIX
355-1-60-BE1
Average Power (W) 0.5 at 60 kHz 1 at 60 kHz 5 at 50 kHz 8 at 50 kHz 1 at 60 kHz
Recommended Power Range (%) 70 to 100 50 to 100 50 to 100 70 to 100 50 to 100
Pulse Repetition Rate (kHz) up to 100 up to 100 up to 150 up to 150 up to 100
…