Search Results

13 - 24 of 46 Products for '355 nm cw laser' Page 2 of 4 |

355 nm cw laser

Paladin

Paladin

lasers are ideal for a wide variety of scientific and industrial applications. Output power from 2 W to 24 W at 355 nm or 532 nm. The Paladin family consists of three unique quasi-CW medium-power and high-power UV lasers, delivering the widest range of power from 2W to 24 W.
* Paladin Advanced 355
*…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…of DPSS Lasers MATRIX Family of DPSS Lasers The MATRIX family of diode-pumped, solid-state, Q-switched and CW lasers is optimized for cost-sensitive applications requiring high throughput, with output powers up to 10W at 1064 nm, 14W at 532 nm and up to 8W at 355 nm. Mephisto Lasers Mephisto Lasers

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…over a spectral range as broad as 355 nm to 11 μm, and incorporate a large 30 mm x 30 mm active area. The high response speed of PowerMax-Pro sensors is particularly advantageous in commercial applications, where it enables CW laser power and pulsed laser energy to be sampled much more frequently,…

Genesis CX-Series

Genesis CX-Series

…High-Power Applications Specs CX STM CX SLM Power Up to 10W visible, 250 mW UV Up to 5W visible, 100 mW UV Standard Wavelengths 355 nm to 577 nm 355 nm to 577 nm Beam Quality M 2 < 1.1 M 2 <1.1 Noise % RMS < 0.1% < 0.1% Stability 8 Hours < ± 1% < ± 1% Features Single transverse mode (TEM 00)…

Genesis CX-STM

Genesis CX-STM

…continuous wave (CW) lasers for life sciences and research applications. Available in 355, 460, 480, 488, 514, 532, 561, 577, 590 nm with up to 10W of output power. The Genesis CX STM-Series is made for end users and OEMs. It is a single transverse mode, TEM 00 laser that delivers extremely…

Genesis CX-Series

Genesis CX-Series

(CW) TEM00 lasers for life sciences and research applications are available in 355, 460, 480, 488, 514, 532, and 577 nm with up to 4 W of output power. Genesis CX STM Compact (OEM) Genesis CX STM Compact (OEM) The Genesis CX STM Compact uses OPSL technology to provide up to 100 mW of 355 nm laser

Genesis CX STM Compact

Genesis CX STM Compact

…to existing Genesis UV lasers. Contact Us About This Product Close PRICE HERE Genesis CX STM Compact (OEM) The Genesis CX STM Compact (OEM) is a single transverse mode, TEM00 is intended for life sciences and research application, and is available up to 100 mW at 355 nm (OEM package only). The…

Microelectronics

Microelectronics

…processing with 193 nm and 248 nm excimer lasers enable vertical LED structures with increased light extraction efficiency. Laser-based sapphire scribing, as well as wafer or substrate dicing with diode-pumped solid-state lasers at 266 nm and 355 nm or picosecond lasers, further reduce production…

(No Title Available)

(No Title Available)

…come with additional modulation capability in the kHz range. Data Sheet Sapphire LP OBIS LG CW Ultraviolet Laser OBIS LG is the high-power ultraviolet laser of choice with:
* up to 50 mW available at 355 nm
* OBIS USB interface compatibility
* integrated control electronics OBIS LG is ideal for…

Laser Focus World - September 2015

Laser Focus World - September 2015

…Ophir-Spiricon's Pyrocam broadband thermal camera analyzes pulsed or
continuous-wave (CW) lasers with output from extreme-UV (EUV) wavelengths
out to terahertz wavelengths, covering the
13-355 nm and 1.06-3000 µm wavelength regions.
"The Pyrocam IV has three significant…

Microsoft Word - Understand Different Laser Beam  Rev 1 Final.doc

Microsoft Word - Understand Different Laser Beam Rev 1 Final.doc


use are wavelength, beam size, laser power (or energy) and
operating mode (CW or pulsed).
Wavelength
The wavelength being measured largely determines the type of
detector device needed. For the wavelength range from 190 nm to
1100 nm, CCD and CMOS cameras or Si-sensor…

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…life sciences have been tailored to use 488 nm and/or 514 nm, which are strong blue and green output wavelengths of the argon ion laser. And HeCd lasers for many years were used in CW UV light applications such as stereolithography. Conversely, these lasers have many cons which are well-documented.…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions