Search Results

25 - 36 of 84 Products for '355 nm laser' Page 3 of 7 |

355 nm laser

Genesis CX-STM

Genesis CX-STM

…continuous wave (CW) lasers for life sciences and research applications. Available in 355, 460, 480, 488, 514, 532, 561, 577, 590 nm with up to 10W of output power. The Genesis CX STM-Series is made for end users and OEMs. It is a single transverse mode, TEM 00 laser that delivers extremely…

Genesis Lasers

Genesis Lasers

…TEM00 lasers for life sciences and research applications are available in 355, 460, 480, 488, 514, 532, and 577 nm with up to 4 W of output power. Genesis CX STM Compact (OEM) Genesis CX STM Compact (OEM) The Genesis CX STM Compact uses OPSL technology to provide up to 100 mW of 355 nm laser light…

Industrial Short-Pulse Lasers

Industrial Short-Pulse Lasers

…Q-switched nanosecond laser offers 20 W at 355 nm at a competitive price point and is ideal for demanding industrial applications in challenging environments. AVIA NX AVIA NX AVIA NX is a diode-pumped, solid-state, Q-switched nanosecond laser offered at 532 nm and 355 nm. The laser comes at several…

Pulsed Q-Switched

Pulsed Q-Switched

…wave laser, with output powers of up to 10W at 1064 nm. MATRIX QS DPSS Lasers MATRIX QS DPSS Lasers The MATRIX family of diode-pumped, solid-state, Q-switch lasers is available in three wavelengths: 355, 532, and 104 nm, and features powers as high as 14 W. Revolution Lasers Revolution Lasers

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…of DPSS Lasers MATRIX Family of DPSS Lasers The MATRIX family of diode-pumped, solid-state, Q-switched and CW lasers is optimized for cost-sensitive applications requiring high throughput, with output powers up to 10W at 1064 nm, 14W at 532 nm and up to 8W at 355 nm. Mephisto Lasers Mephisto Lasers

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…can work at 1064 nm, 532 nm, 355 nm and 266 nm without the need to change diffusers or any other accessories. The J-50MB-IR sensor is similar to the J-50MB-YAG sensor, except that its diffuser is optimized for long pulse lasers that operate between the range of 500 nm and 2940 nm. It is ideal for…

Genesis CX-Series

Genesis CX-Series

…High-Power Applications Specs CX STM CX SLM Power Up to 10W visible, 250 mW UV Up to 5W visible, 100 mW UV Standard Wavelengths 355 nm to 577 nm 355 nm to 577 nm Beam Quality M 2 < 1.1 M 2 <1.1 Noise % RMS < 0.1% < 0.1% Stability 8 Hours < ± 1% < ± 1% Features Single transverse mode (TEM 00)…

(No Title Available)

(No Title Available)

…additional modulation capability in the kHz range. Data Sheet Sapphire LP OBIS LG CW Ultraviolet Laser OBIS LG is the high-power ultraviolet laser of choice with:
* up to 50 mW available at 355 nm
* OBIS USB interface compatibility
* integrated control electronics OBIS LG is ideal for applications…

(No Title Available)

(No Title Available)

laser offered at 532 nm and 355 nm. The AVIA NX family delivers the highest power on the market, in a small lightweight package. Available at several power levels from 20 W to 85 W, every model has the same footprint and electrical interface. Data Sheet AVIA NX Green CO Laser - 5µm CO Lasers Offer…

Picosecond laser

Picosecond laser

…For more information refer to www.-
coherent.com. The optical wavelength of the laser output is
1064 nm (IR, infrared). An additional frequency conversion to
532 nm (SHG, green) and 355 nm (THG, UV) is optionally
possible. The output for IR, SHG and THG are spatially separated…

Industrial Laser Solutions - November/December 2015

Industrial Laser Solutions - November/December 2015

…packaging. Also, the ink is a possible source of
contamination.
In this test, the laser was used to mark
2D barcodes on the curved surface of a pill
bottle (FIGURE 1). The 355 nm laser, working with a focused spot size of 30µm, was
scanned over the part surface using a…

Laser Focus World - August 2016

Laser Focus World - August 2016

…into
developing the AVIA. This was a UV (355
nm) DPSS laser that offered the combination of output power, reliability, and lifetime necessary for high-throughput commercial applications.
But, even today, large-scale adoption of
UV lasers for via drilling still hasn't happened for…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions