Search Results

25 - 36 of 83 Products for '355 nm pulsed laser' Page 3 of 7 |

355 nm pulsed laser

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…for short pulse duration, which can produce similar results in many materials.
Excimers represent another important pulsed laser technology. They can produce several discrete wavelengths throughout the UV; depending on the gas
combination, emission ranges from 157 to 348 nm. The deep-UV…

AVIA 355-28 DS

AVIA 355-28 DS

…Rate (kHz) Pulse Energy (µJ)
1064 nm 532 nm only 355 nm 532 nm
100 40 20 12 14
200 25 11 7.5 7.5
500 10 5 2.6 2.6
1000 6 2 1 1
System Specifications
Typical Data
RAPID
High-Power Industrial Picosecond Laser
VISIBLE AND INVISIBLE LASER RADIATION.

PaladinCompact355 Datasheet 2017.pdf

PaladinCompact355 Datasheet 2017.pdf

…Paladin Compact
355-2000/4000
Wavelength (nm) 355
Output Power (W)
Paladin Compact 355-2000 Air-Cooled >2
Paladin Compact 355-4000 Air-Cooled >4
Repetition Rate (MHz) 120 ±2
Pulse Length (ps) >15 at 1064 nm
Spatial Mode TEM00
M2 <1.2
Beam…

PaladinAdvanced355 Datasheet 2017.pdf

PaladinAdvanced355 Datasheet 2017.pdf

Paladin Advanced 355 Datasheet
1
Fixed power.
2
Relative to laser mount.
3
Head temperature is stabilized to ±0.5 35°C by the chiller.
SPECIFICATIONS Paladin Paladin Paladin Paladin
355-8000 355-10000 355-16000 355-24000
Wavelength (nm) 355
Output…

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…1064 nm which
can be intracavity doubled to give green output at
532 nm. Frequency tripling delivers UV output at
355 nm. In addition, these lasers also produce a
couple of weaker output wavelengths, which can be
frequency doubled to 473 nm and 561 nm.
DPSS lasers offer…

IndustrialUltrafast Whitepaper.pdf

IndustrialUltrafast Whitepaper.pdf

…silicon substrate
using a single, 355 nm, ultrafast laser pulse. No molten
silicon or subsurface damage is visible, and no postprocess cleaning is therefore required.
Figure 6: Removal of a SiO2 from silicon using 355 nm
picosecond pulses at an optimum fluence of ~0.11 J/cm2

Laser-Measurement-and-Control-Catalog FORMFIRST.pdf

Laser-Measurement-and-Control-Catalog FORMFIRST.pdf


· UV operation from 10 nm to 355 nm
· Choice of 12 mm or 30 x 40 mm diameter apertures
· Operation with BeamView Analyzer Systems
These Extreme-UV Beam Profiler Optics use UV-to-visible fluorescence
converter face plates to couple the input laser beam to any appropriate

2016-Ultrafast-Laser-Systems-Catalog.pdf

2016-Ultrafast-Laser-Systems-Catalog.pdf

…11.0
12.0
13.0
14.0
15.0
16.0
17.0
6 12 18 24
Laser
Measurement
and Control
Accessories
Introduction
Oscillators
Amplifiers
Pump
Lasers
Oscillator
Accessories
Amplifier
Accessories
Accessory

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…The Paladin laser is a diode-pumped solid-state mode-locked laser
that emits ultra violet (355 nm) output with pulse repetition rates in
the 80 MHz region and pulse lengths around 15 ps. Specifications
for the Paladin are given in Table 2-1 through Table 2-4.
The Paladin laser

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

nm (typical)
355 nm (specification)355 nm (typical)
Pulse Repetition Rate (kHz)
Energy(µJ)
0
50
100
150
200
250
0 100 200 300 400 500 600
1064 nm (specification)1064 nm (typical)
532 nm (specification)532 nm (typical)
355 nm

LaserCam-HR-II-Data-Sheet.pdf

LaserCam-HR-II-Data-Sheet.pdf

…LDFP-UV) OD = 2.5 at 632.8 nm
Electrical Interface USB 2.0
Capture Modes Continuous (CW), pulsed
Variable Exposure Time 1 msec to 500 msec, default at 5 msec
Pulsed Mode Trigger Methods Trigger In (TTL)
Trigger Delay (s) 75 20
Maximum Pulse Trigger in Rate (Hz) 200…

Photonics Spectra - July 2014

Photonics Spectra - July 2014

…wavelength range
(300 nm to 11 µm).
The response speed of thin-film thermoelectric sensors allows users to move
beyond just measuring average power,
and enables visualization of the temporal
pulse shape and peak power of modulated
lasers with pulse lengths greater than…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions