Ask a Question
Coherent

Search Results

1 - 11 of 11 Products for '355 nm pulsed laser' Page 1 of 1 |
  • 1

355 nm pulsed laser

Nanosecond Lasers

Nanosecond Lasers

…- diode-pumped, solid-state, Q-switched laser offered at 532 nm and 355 nm with output powers as high as 85 W
* AVIA LX - diode-pumped, solid-state, Q-switched laser offered at 355 nm with an output power of 20 W
* MATRIX QS - diode-pumped solid-state laser offered at three wavelengths and various…

Picosecond Lasers

Picosecond Lasers

…industrial picosecond laser, combining cutting-edge specification with industrial reliability and user-friendliness.
* RAPID - Picosecond laser platform delivering up to 10W and 1MHz at 1064, also available at 532 nm and 355 nm.
* HELIOS - Family of picosecond lasers with pulse energies up to 100 µJ…

MATRIX QS DPSS Lasers

MATRIX QS DPSS Lasers

…Disk Indent card LCD Medical Device Plastic Memory Photopolymer ITO layers Quartz Resistor --> Features & Benefits Power Wavelength 355 nm 532 nm 1064 nm 1 Watt M1; MATRIX 355-YAG MATRIX1064-LP 2 Watt MATRIX 355-1-60/BE; MATRIX 355-1,5-70 8 Watt MATRIX 355-5-50; MATRIX 355-8-50 MATRIX 532-7-30;…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…HyperRapid NX enables the most advanced applications with state-of-the-art pulse control and synchronization features. Pulses can be triggered on-demand with low jitter ( Features & Benefits
* 1064 nm, 532 nm or 355 nm
* High power and burst mode for high throughput at significantly reduced TCO…

Picosecond Lasers

Picosecond Lasers

…industrial picosecond laser, combining cutting-edge specification with industrial reliability and user-friendliness.
* RAPID - Picosecond laser platform delivering up to 10W and 1MHz at 1064, also available at 532 nm and 355 nm.
* HELIOS - Family of picosecond lasers with pulse energies up to 100 µJ…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

nm 1 J/cm 2 355 nm 0.8 J/cm 2 532 nm 2.8 J/cm 2 1064 nm 14 J/cm 2 The J-50MB-IR is specifically designed for high damage threshold when used with pulsed lasers used in medical procedures such as Erbium and Holmium lasers. It has a damage threshold in excess of 100 J/cm at 2940 nm with a 100 µs pulse

PowerMax-Pro Sensor

PowerMax-Pro Sensor

…over a spectral range as broad as 355 nm to 11 μm, and incorporate a large 30 mm x 30 mm active area. The high response speed of PowerMax-Pro sensors is particularly advantageous in commercial applications, where it enables CW laser power and pulsed laser energy to be sampled much more frequently,…

LaserCam HR UV

LaserCam HR UV

LaserCam-HR-UV High-Resolution UV laser beam profiling system for beam diagnostic applications from 190 nm to 355 nm. The large format, 2/3” CMOS camera offers incredible performance, and is robust in the harsh UV wavelength environments that often degrade typical beam diagnostic cameras. Contact Us…

LaserCam-HR II

LaserCam-HR II

…Overview of Features:
* Ease-of-use connectivity
* USB bus-powered low voltage operation
* Broad spectral range:
* 190 nm to 1100 nm
* 400 nm to 1100 nm (with LDFP)
* 190 nm to 355 nm (with BIP-12F)
* Large dynamic range
* Digital output through USB 2.0 eliminates the need for an interface card…

HYPER RAPID

HYPER RAPID

…The family of HyperRapid picosecond lasers offers performance at 50 W and 100 W at 1064 nm and 1000 kHz. Contact Us About This Product Close PRICE HERE High Power Industrial Picosecond Laser The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of the…

AVIA NX

AVIA NX

AVIA NX AVIA NX is a diode-pumped, solid-state, Q-switched laser offered at 532 nm and 355 nm. The AVIA NX family delivers the highest power on the market, in a small lightweight package. Available at several power levels from 20 W to 85 W, every model has the same footprint and electrical…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions