Search Results

1 - 12 of 38 Products for '415' Page 1 of 4 |
Related Categories: Obis 640 | Obis 637 | Obis 660 | Obis 488 Ls | Obis 785

415

COHR OBIS 6-LaserRemote DS 0317 1.pdf

COHR OBIS 6-LaserRemote DS 0317 1.pdf

…VIEW. The OBIS 6-Laser Remote comes with wavelength tags to identify each laser connected.
OBIS LX/LS 6-Laser Remote Datasheet
375
415
405
420
458
445
473
488
561
552
514
520
532
635
594
637
650
647

THz-Raman Well-Plate System (WPS)

THz-Raman Well-Plate System (WPS)

…Maximum Sample Size 125 mm x 85 mm (fits standard well plate) Power/Voltage 110-240 VAC ± 10%, 300 W Maximum Dimensions 950 mm (W) x 650 mm (D) x 415 mm (H) Weight 50 kg Laser Class Class 1 Laser. Complied with IEC60825-1 The TR-WPS has been designed to be fully automated, from sample insertion to…

INNOVA 90C

INNOVA 90C

INNOVA 90C High levels of performance, long term reliability, and multiple operating configurations. Contact Us About This Product Close PRICE HERE INNOVA 90C Highlights:
* SuperInvar resonator for superior passive stability
* Single-frequency option for narrow linewidth and long coherence length
*…

INNOVA Sabre Laser

INNOVA Sabre Laser

INNOVA Sabre INNOVA Sabre provides the ultimate in high-power ion laser performance, combined with extraordinary ease-of-use. A single digital remote module gives you access and control of all critical laser functions such as wavelength acquisition and tuning, automated TEM 00-acquiring shutter,…

MATRIX-Accessories-Data-Sheet.pdf

MATRIX-Accessories-Data-Sheet.pdf


103.4 mm
(4.07 in.)
41.1 mm
(1.62 in.)
120 mm
(4.72 in.)
64 mm
(2.52 in.)
28 mm
(1.1 in.)
415 mm
(16.34 in.)
180 mm
(7.09 in.)
100 mm
(3.94 in.)
103.4 mm
(4.07 in.)
41.1 mm
(1.62 in.)
Accessories…

00 Laser Cooling.book

00 Laser Cooling.book

…310, 32X
415 (60)
8.5 - 11.6
(2.2 - 3.0)
150 - 275
(22 - 40)
0.47 4.2 (0.165)
PureLight, PureLight Star
SkyLight, SkyLight Star
415 (60)
8.5 - 11.6
(2.2 - 3.0)
150 - 275
(22 - 40)
0.47 4.2 (0.165)
Enterprise II 415 (60)

COHR MATRIXaccessories DS 1118 2.pdf

COHR MATRIXaccessories DS 1118 2.pdf


(2.52 in.)
Side View
Bottom View

* Compatible to standard 1 inch
and 25 mm grid breadboards.
28 mm
(1.1 in.)
415 mm
(16.34 in.)
180 mm
(7.09 in.)
100 mm
(3.94 in.)
103.4 mm
(4.07 in.)
41.1 mm
(1.62 in.)
Side…

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…m
Low Nominal High
WD
(mm)
15° 17° 19°
100 54 m 48 m 43 m
250 136 m 119 m 107 m
500 273 m 239 m 214 m
750 415 m 360 m 322 m
660-120, FA Focus, 17°, M2=1.3 660-120, FA Focus, 4.5 EFL, M2=1.3
Equation 2
Depth of Field
The Depth of field of…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…<100 mg/liter (5.9grains/gallon) or 100 parts per million of calcium
Heat load 55 kW
Pressure differential (1) 170 kPa typ. (25 psi); 415 kPa max. (60 psi) (2)
Maximum static pressure (3) 620 kPa (90 psi)
Inlet temperature 10°C to 30°C (41 to 86°F) (4)
(1) The pressure…

00 Sabre Preinstall.book

00 Sabre Preinstall.book

…mg/liter (5.9 grains/gallon) or 100 parts per million of calcium
Heat load 55 kW
Pressure differential (1) 170 kPa typical. (25 psi); 415 kPa max. (60 psi) (2)
Maximum static pressure (3) 620 kPa (90 psi)
Inlet temperature 10°C to 30°C (41 to 86°F) (4)
(1) The pressure…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…Mode....................................................................... 4-15
4-4. Full Scale Range Settings - Watts Mode........................................................................ 4-15
7-1. Coherent Service…

book.book

book.book

Section Four: Install and Run Software
4 - 9
The example in Figure 4-15 shows a laser operating in Continuous Wave (CW) mode.
Click the Start button and the laser immediately begins emitting.
If the CDRH delay was configured at the factory, there is a 5-second delay before the…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions