Ask a Question
Coherent

Search Results

1 - 12 of 54 Products for '500 Watt' Page 1 of 5 |

500 Watt

AVIA NX nanosecond laser | Coherent

AVIA NX nanosecond laser | Coherent

…and productivity are ultimately determined by laser power. AVIA NX delivers the industry’s highest UV power – up to 40 watts – and the highest green power – up to 65 watts. And with the green AVIA NX, you even have the choice of high pulse energy or high repetition rate to perfectly match the…

LAMBDA SX Excimer Laser Series | Coherent

LAMBDA SX Excimer Laser Series | Coherent

…HERE Model Name Wavelength (nm) Max. Pulse Frequency (Hz) Max. Pulse Energy (mJ) Max. Power (W) LAMBDA SX C600 308 600 1000 600 LAMBDA SX E500 500 1000 500 Datasheet LAMBDA SX Applications Application Process Material Ink-Jet Nozzle Drilling 3D-Structuring Roll-To-Roll Circuit Patterning Pulsed…

Life Sciences and Medical Applications

Life Sciences and Medical Applications

…approaches. Some utilize tight focus and use just a few tens of milliwatts, whereas those that rely on wide-field excitation may use lasers at the 1 watt level and beyond. In order to track the four different bases, up to four different visible laser wavelengths are used depending on the fluorophore…

Libra PreInstallation.book

Libra PreInstallation.book

…Level The Libra and its component lasers produce visible and invisible radiation over a wavelength range of 500 to 1100 nm, with a maximum of 40 Watts continuous wave power, and < 5 Watts maximum energy per 30 femtosecond to 6 picosecond pulse [CFR 1040.10 (h)(2)/ EN 60825-1/ IEC 608225-1, Clause…

Libra PreInstallation.book

Libra PreInstallation.book

…Level The Libra and its component lasers produce visible and invisible radiation over a wavelength range of 500 to 1100 nm, with a maximum of 40 Watts continuous wave power, and < 5 Watts maximum energy per 30 femtosecond to 6 picosecond pulse [CFR 1040.10 (h)(2)/ EN 60825-1/ IEC 608225-1, Clause…

Vitara Preinstall.book

Vitara Preinstall.book

…Accessible Radiation Level The Vitara and its component lasers produce visible and invisible radiation over a wavelength range of 500 to 1100 nm, with a maximum of 10 Watts continuous wave power, and 25 nJ maximum energy per < 200 fs pulse [CFR 1040.10 (h)(2)/ EN 60825-1/ IEC 60825-1, Clause 6].…

Microsoft Word - kW Thermopile Damage Threshold.doc

Microsoft Word - kW Thermopile Damage Threshold.doc

…following chart outlines the safe beam sizes for typical CO2 and Nd:YAG kW lasers. 0 5 10 15 20 25 30 35 40 45 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 Incident Laser Power (watts) MinimumBeamDiameter (milimeters) Safe Damage Beam Diameter and Flow Rate for non-Gaussian Beams Power 1/e^2…

Book.book

Book.book

…completely flooded by laser light, and the sensor aperture is entered here. Available values: ON and OFF (factory default). Available range: 0.01 to 500.00 cm2 or 0.1 to 250 mm. Available units: cm2 and mm. The area can be entered in terms of area in square centimeters or in terms of the diameter of…

Bio Photonics - October 2015

Bio Photonics - October 2015

…involves many sites spread over large flow cells, or uses slides needing widefield illumination, the power requirement can increase to multiple watts. For applications where single strands are being sequenced and, therefore, signal is inherently low, power is especially critical because these…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…Parameter Description Data Argument Range Factory Value Message Prompt ON|OFF OFF Message Handshaking ON|OFF OFF Measurement Mode DBM|Joules|Watts Watts Measurement Record Data Items PRI|FLAG|SEQ PRI Area Correction State ON|OFF OFF Area Correction Aperture 0.01..500.00 1.0 Speedup Applied OFF|ON…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…Parameter Description Data Argument Range Factory Value Message Prompt ON|OFF OFF Message Handshaking ON|OFF OFF Measurement Mode DBM|Joules|Watts Watts Measurement Record Data Items PRI|FLAG|SEQ PRI Area Correction State ON|OFF OFF Area Correction Aperture 0.01..500.00 1.0 Speedup Applied OFF|ON…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…Parameter Description Data Argument Range Factory Value Message Prompt ON|OFF OFF Message Handshaking ON|OFF OFF Measurement Mode DBM|Joules|Watts Watts Measurement Record Data Items PRI|FLAG|SEQ PRI Area Correction State ON|OFF OFF Area Correction Aperture 0.01..500.00 1.0 Speedup Applied OFF|ON…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions