Search Results

1 - 12 of 17 Products for '532 Nm Nd Yag' Page 1 of 2 |

532 Nm Nd Yag

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…300 10 50
Maximum Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns)
2.8 (at 532 nm, 10 ns)
0.75 (at 355 nm, 10 ns)
1.0 (at 266 nm, 10 ns)
Detector Coating MaxBlack
Diffuser YAG
Calibration Wavelength (nm) 1064
Calibration Uncertainty (%)(k=2) ±2
Energy…

Prometheus

Prometheus

…oscillation noise at frequencies below 1 MHz. Please inquire about iodine frequency stabilization options. Prometheus Wavelength 532 nm, 1064 nm Power at 532 nm 20mW, 50mW, 100mW Linewidth (over 100 ms) ~1 kHz Tuning range 60 GHz Noise (RIN at f>10 kHz) Ultra-Narrow Linewidth CW DPSS Green…

Continuous-Wave (CW)

Continuous-Wave (CW)

…wave power up to 20 W at 532 nm. Verdi V Series Verdi V Series Compact DPSS lasers suited for Ti:Sapphire pumping enabling the lowest CW noise. Compass Lasers Compass Lasers Compass (COMpact All Solid State lasers) is a family of solid-state lasers in the green (532 nm) Diode-Pumped Solid-State…

Mephisto Lasers

Mephisto Lasers

…is further improved by our acclaimed Noise Eater (NE) technology which is now included with all Mephisto variants as standard. Mephisto product line includes: Mephisto (S) – Ultimate stability at 1064 nm or 1319 nm Prometheus – SHG variants at 532 nm Mephisto MOPA – High power versions at 1064 nm

Continuous-Wave (CW)

Continuous-Wave (CW)

…(OPSL) and diode-pumped solid-state (DPSS) lasers designed for Ti:Sapphire oscillators and amplifiers, featuring continuous wave power up to 20 W at 532 nm. Verdi V Series Verdi V Series Compact DPSS lasers suited for Ti:Sapphire pumping enabling the lowest CW noise. Call 1-800-227-8840 Outside the…

Sapphire Lasers

Sapphire Lasers

…footprint compared to (air-cooled) ion lasers
* 532 nm: no green noise, no complex resonator design required, no thermal lensing compared to Nd:YAG/ YVO4lasers
* 561nm: 4x higher efficiency/ less power consumption and heat dissipation than “yellow YAGs”
* Flexible interface concept: analog, RS-232,…

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…the range from medium to
high (multiwatt) powers. Then in 2009, a multiwatt,
single-longitudinal mode OPSL (up to 7 Watts at
532 nm) was released by Coherent under the brand
name VerdiTM G-series. At Photonics West 2011,
Coherent introduced the OBIS family (see Figure…

Lasers | Photonics Handbook®

Lasers | Photonics Handbook®

…wavelength, at last freeing applications from the restrictions of limited legacywavelength choices (i.e., 488 and 514 nm from argon-ion lasers and 532 nm from frequency-doubled YAG lasers). Indeed, OPSLs represent a paradigm shift in
lasers because they can be designed for the needs of the…

Sapphire Lasers

Sapphire Lasers

…footprint compared to (air-cooled) ion lasers
* 532 nm: no green noise, no complex resonator design required, no thermal lensing compared to Nd:YAG/ YVO4lasers
* 561nm: 4x higher efficiency/ less power consumption and heat dissipation than “yellow YAGs”
* Flexible interface concept: analog, RS-232,…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…can work at 1064 nm, 532 nm, 355 nm and 266 nm without the need to change diffusers or any other accessories. The J-50MB-IR sensor is similar to the J-50MB-YAG sensor, except that its diffuser is optimized for long pulse lasers that operate between the range of 500 nm and 2940 nm. It is ideal for…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…and CW lasers is optimized for cost-sensitive applications requiring high throughput, with output powers up to 10W at 1064 nm, 14W at 532 nm and up to 8W at 355 nm. Mephisto Lasers Mephisto Lasers Mephisto is a family of single frequency solid-state lasers based on Nd:YAG crystal in Non-Planar…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…Max. Energy Density (J/cm2) 14.0 (at 1064 nm, 10 ns)
2.8 (at 532 nm, 10 ns)
0.75 (at 355 nm, 10 ns)
1.0 (at 266 nm, 10 ns)
> 100 (at 2940 nm, 100 µs)
Sensor Coating MaxBlack
Diffuser YAG IR
Calibration Wavelength (nm) 1064 1064, 2940
Calibration Uncertainty…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions