Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 53 Search Results for 532nm

1Coherent Inc. Compass Lasers For Bioinstrumentation Applications
Compass Lasers Family of green (532 nm) and yellow (561 nm) DPSS CW lasers for bioinstrumentation, imaging, inspection and reprographics. Compass Lasers News... New 20 mW Compass 115M and 50 mW Compass 561 lasers allow OEM integrators to immediately benefit from shorter processing times in…
Related Searches: 532nm cw laser | compass | dpss 532

2Coherent Inc. Verdi Family of OPSL and DPSS Pump Lasers
Verdi Family of Lasers Verdi is a family of optically pumped semiconductor lasers (OPSL) and diode-pumped solid-state (DPSS) lasers with CW power up to 18W at 532 nm. Verdi G18 Highest Power. Smallest Size. Verdi G18 delivers the highest power from the smallest laser head on the market, enabling…
Related Searches: verdi | 532nm cw laser | verdi 5w | verdi g

3Coherent Inc. Diode-Pumped Solid-State Lasers: CW and Pulsed
45 mJ/pulse and wavelengths in the IR, VIS and UV. CW models feature output powers from 10 mW to >10W. " /> Diode-Pumped Solid-State Lasers The Coherent family of solid-state, diode-pumped lasers includes continuous-wave and pulsed models that enable a wide range of materials processing, scientific,…
Related Searches: 532nm cw dpss laser | 532nm pulsed laser | 532nm cw laser | 561nm

4pdf document  CompactSourcesGiveBespokeWavelengths Best match in this PDF  |  All matches in this PDF
…excites a setoffluorophoresthatpreviouslyrequired both 488 and 514nm. In essence, two ionlaser wavelengths can now be replaced by a single compact OPSL. 532nm for forensic applications Forensics is an application that typically used DPSS lasers, but desired the smaller size and lower cost of OPSLs. Forensic…
Related Searches: 577nm | tracer operation manual | tracer | fingerprint

5pdf document  70410-186e-ILS Best match in this PDF  |  All matches in this PDF
…metallization. This is a technology patented by BP Solar in the mid-1980s. After the surface has been antireflection coated with silicon nitride, a 532nm (or 355nm) laser is used to scribe narrow surface grooves, which are then plated. This results in electrodes with a high volume and collection surface…
Related Searches: indium foil | corey dunsky | silicon drilling | cigs

6pdf document  pdf 128 Best match in this PDF  |  All matches in this PDF
…nickel alloys, and diamond can be laser processed using high pulse energies, short pulse duration (low nanosecond range) and shorter wavelengths (532nm, 355nm and 266nm). High aspect ratio hole drilling (5 µm - 50 µm dia.) with exceptional accuracy (± 0.5 µm roundness) in thick ceramics (up to 1…
Related Searches: 355 nm laser | sapphire windows | third harmonic generation | co2 laser short pulse

7Coherent Inc. The leading source in Ti:S laser pumping.
Verdi G Series Based on optically pumped semiconductor laser (OPSL) technology, the new Verdi G-Series is suited for Ti:Sapphire pumping and enables the lowest CW noise applications from 2W, 5W, 7W, 8W, 10W, 12W, 15W and 18W of 532 nm. Verdi G18 Highest Power. Smallest Size. Verdi G18 delivers the…
Related Searches: verdi g10 | verdi g | 532nm cw laser | verdi 10w

8Coherent Inc. Verdi V Series DPSS Laser for Ti:Sapphire Pumping
Verdi V Series Verdi V lasers are compact DPSS lasers suited for Ti:Sapphire pumping. They enable the lowest CW noise applications at 12W or 18W of 532 nm, and are suited for single frequency applications from 2W, 6W, 8W, 10W, 12W and 18W. Software Updates for DPSS Lasers Updated GUI Software for…
Related Searches: verdi v18 | verdi 5 | verdi | cw opo

970410-186e.indd  (PAGE 3 OF 3)
…This is a technology
patented by BP Solar in the mid-1980s.
After the surface has been antireflection
coated with silicon nitride, a 532nm (or
355nm) laser is used to scribe narrow
surface grooves, which are then plated.
This results in electrodes with a high
volume…
Related Searches: indium foil | cigs | ar coating | corey dunsky

10pdf document  HighPeakPowerSolidStateLaserforMicromachiningofHardMaterialsRev2 Best match in this PDF  |  All matches in this PDF
…head shown previously in Figure 2. Since steel is less sensitive to laser wavelength holes can be drilled using 1064 nm, as shown in Figure 9, or 532nm or 355nm. Figure 9: Trepanned holes in stainless steel drilled with 1064 nm (picture courtesy of Fraunhofer Institute IWS Dresden, Germany). Recent…
Related Searches: 355 nm laser | silicon drilling | 355 nm diode | sapphire


Page 1 2 3 4 5 6 of 6 | Next


Site Search by  Site Search powered by SLI Systems
.