45 mJ/pulse and wavelengths in the IR, VIS and UV. CW models feature output powers from 10 mW to >10W. " /> Diode-Pumped Solid-State Lasers The Coherent family of solid-state, diode-pumped lasers includes continuous-wave and pulsed models that enable a wide range of materials processing, scientific,…
Related Searches:532nm pulsed laser | 532nm cw laser | pulsed diode laser | 532nm cw dpss laser
…high quality, high aspect ratio micromachining requires high peak power and short pulse durations. Keywords: DPSS laser, micro structuring, micromachining, UV light 1. INTRODUCTION Lasers with nano-second long pulses are now recognized as a rapidand efficient tool for micromachining precise holes and…
Related Searches:532nm pulsed laser | high-aspect-ratio laser micro-machining | 355 nm laser | sapphire
…by BP-Solar for LGBC [42] and from equipment optimization for laser edge isolation [28]. Collectively, this promotes high-power (10W+), nanosecond pulse-duration, diode-pumped solid-state (DPSS) lasers at wavelengths in the green (532nm) or UV (355nm) ranges. Fast throughput, aligned with c-Si requirements…
Related Searches:beam homogenizer | 532nm pulsed laser | silicon ablation | dopant diffusion
…using the new generation of DPSSNd:YAG lasers at the fundamental and harmonic wavelengths. Ceramics, steel and nickel alloys, and diamond can be laser processed using high pulse energies, short pulse duration (low nanosecond range) and shorter wavelengths (532nm, 355nm and 266nm). High aspect ratio hole…
Related Searches:third harmonic generation | 532 nm pulsed laser | tea co2 laser | uv diode laser
…by BP-Solar for LGBC [42] and from equipment optimization for laser edge isolation [28]. Collectively, this promotes high-power (10W+), nanosecond pulse-duration, diode-pumped solid-state (DPSS) lasers at wavelengths in the green (532nm) or UV (355nm) ranges. Fast throughput, aligned with c-Si requirements…
Related Searches:dopant diffusion | photovoltaic scribe | 532nm pulsed laser | ar coating
…532-nm pump laser. This Ti:sapphire unit acts as the system's master oscillator with a repetition rate of 70 to 90 MHz. The output of this oscillator is then fed into one or more amplifiers through a "pulse picker." The amplifier is pumped by a pulsed Nd:YLF laser or by a 532-nm CW laser. Two distinct…
Related Searches:femtosecond laser system | 532nm cw laser | 532nm pulsed laser | oled
…pulsedlaser deposition (PLD). High energy excimer lasers enable this technique since every material is amenable to their high photon energies. Spectral properties, temporal pulse and laser beam parameters of state of the art excimer lasers will be compared with frequency converted Nd:YAG lasers. Both…
Related Searches:213nm | nd yag | flashlamp | top hat profile
…CA 95054 INVISIBLE AND VISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS 4 LASER PRODUCT PER IEC/EN 60825-1 (2007) MODE-LOCKED LASER 500-100nm, < 25nJ PER < 200fs PULSE, < 4W CW < 25W CW AT 532nm VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK…
Related Searches:verdi 10 | 210 power meter | vitara | closed loop chiller