Search Results

Refine
1 - 12 of 23 Products for '5c' Page 1 of 2 |
Related Categories: Meta 5c | Calibration Services | Meta Laser

5c

Production Automation Options for META

Production Automation Options for META

…highest volume production situations. Contact Us About This Product See Related Products Close PRICE HERE Accessory options for META 1.5C, 2C, 4C, 5C & 10C Coherent’s Production Automation options are designed to enhance the highest volume production situations. Features & Benefits Automatic…

00 Laser Cooling.book

00 Laser Cooling.book

…26 kW 40 kW 60 kW 55 kW
5 kW max @ 2 gpm
@ 40°C ambient
Temperature delta at
maximum plant side
flow rate
4°C 4°C 5°C 5°C 5°C N/A
Maximum plant side
static pressure
60 psi 100 psi 100 psi 100 psi 90 psi N/A
Plant water temperature
range
10°…

DIAMOND C-30+ Air-Cooled OEM Laser Preinstallation Manual, Rev. AA

DIAMOND C-30+ Air-Cooled OEM Laser Preinstallation Manual, Rev. AA


Cooling Air
Heat Dissipation (W) < 575
Maximum Case Temperature < 60ºC (140ºF)
Operating Environment
Temperature 5°C to 50°C (41ºF to 122ºF)
Altitude < 2,000 m (< 6,500 ft.)
Humidity Non-condensing
Shipping/Storage Environment - 10ºC to 60ºC…

DIAMOND C-60+ Series OEM Lasers Preinstallation Manual, Rev. AA

…Cooling Air or Liquid
Heat Dissipation (W) < 1200
Maximum Case Temperature < 60ºC (140ºF)
Operating Environment
Temperature 5°C to 45°C (41ºF to 113ºF)
Altitude < 2,000 m (< 6,500 ft.)
Humidity Non-condensing
Shipping/Storage Environment - 10ºC to 60ºC…

Revolution High-Power Q-Switched Laser System Preinstallation Manual

Revolution High-Power Q-Switched Laser System Preinstallation Manual

…free from dust and drafts, with
humidity range within 40-60% (non-condensing) and does not
exhibit temperature fluctuations greater than ± 5°C.
The environmental rating of the altitude for laser operation must be
below 10,000 feet and for non-operating laser must be below 25,000…

Coherent ExactWeld230P DS EN 1019.pdf

Coherent ExactWeld230P DS EN 1019.pdf

…Class 1
Description As seated and standing workplace available (rotary table)
Working Temperature 25°C ±10°C
Storage Temperature 5°C to 40°C
Environmental Conditions Not condensing, not corrosive, not freezing
INTEGRATED Compact Evolution
- CW 300 W diode laser

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf


Temperature +15°C to 27°C (59°F to 80°F)
Relative Humidity <60%, non-condensing
Shipping Specifications
Temperature +5°C to +50°C (41°F to 122°F)
Relative Humidity 10 to 90%, non-condensing
1 Specified at default repetition rate = 500 kHz for Hyper Rapid…

COHR HyperRapid100 355-SW DS 0716 6.pdf

COHR HyperRapid100 355-SW DS 0716 6.pdf


Temperature +15°C to 27°C (59°F to 80°F)
Relative Humidity <60%, non-condensing
Shipping Specifications
Temperature +5°C to +50°C (41°F to 122°F)
Relative Humidity 10 to 90%, non-condensing
Typical Data
High Power Industrial ps-Laser
HyperRapid…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…Fault, "0" Safe
Bit 0 - Flow
Bit 1 - 48V Monitor
Fault when V< 42V or V> 53V
Bit 2 - Reserved
Bit 3 - 5V Monitor
Fault when V<4.75V or V>5.25V
Bit 4 - Dew Point
Fault when Dew Point < Ambient
Temperature - 5°C margin
Bit 5 - Spare

Picosecond laser

Picosecond laser

…at least:
Hyper Rapid 10 l/min 2.65 US gallons/min
provide a water pressure of max. 5 bar
The water temperature has to be between 5°C and 25°C
(41°F and 77°F). 2 not-transparent water hoses (in&out),
inner-diameter: 1/2 inch (CPC connectors for attaching the
chiller…

COHR DiamondCx-10 DS 1119 3.pdf

COHR DiamondCx-10 DS 1119 3.pdf

…Dissipation (W) 1700
Maximum Case Temperature <60°C (140°F)
Operating Environment
Temperature
Altitude
Humidity
5°C to 45°C (41 to 113 °F)
2000 m (6500 ft)
Non-condensing 95%
Shipping/Storage Environment -10°C to +60°C (14 to 140°F), Non-condensing…

PWS Mini EN.pdf

PWS Mini EN.pdf

…150 mm 3.5 m/min. 12 m
Y 150 mm 3.5 m/min 12 m
Z 75 mm 3.5 m/min 25 m
Optional: Direct drive rotary table with air actuated collet (5c collet)
Manual rotation of fiber processing head ± 90°
Manual slide for focusing fiber processing head 13 mm
Work area
Table size…