Search Results

1 - 12 of 20 Products for '60 Watt' Page 1 of 2 |

60 Watt

MATRIX Family of Q-Switch Lasers

MATRIX Family of Q-Switch Lasers

…& Benefits Power Wavelength 355 nm 532 nm 1064 nm 1 Watt M1; MATRIX 355-YAG MATRIX1064-LP 2 Watt MATRIX 355-1-60; MATRIX 355-1, 5-150 8 Watt MATRIX 355-5-50; MATRIX 355-8-50 MATRIX 532-7-30; MATRIX 532-8-100 MATRIX 1064-7-10 14 Watt MATRIX 532-14-40 MATRIX 1064-10-30 Key benefits for your…

HYPER RAPID Lasers

HYPER RAPID Lasers

…Beam Divergence, Full Angle (mrad) 85 Beam-Pointing Stability in Full PRF range (µrad / °C) <50 Electric Supply 100 to 230 VAC/50 to 60 Hz/2.5 kW 100 to 230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time <40 min from…

COHR DIAMOND C 55 C 60 DS 0619 2.pdf

COHR DIAMOND C 55 C 60 DS 0619 2.pdf

Diamond C-55/C-60+ Series Low Power CO2 OEM Lasers for Marking and Engraving Applications The Coherent C-60+ CO2 laser provides 60 Watts of power with bestin-class reliability and package size, making it the OEM laser of choice for high volume laser marking and engraving systems. This…

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

…with 40 watts of average power and a pulse width ~350 fs. The surface
roughness was < 350 nanometers, as measured with an AFM.
The Coherent Monaco is an example of this new generation of industrial femtosecond lasers
which already offer average power as high as 60 watts with higher…

COHR OBIS CellX DS 0117 3.pdf

COHR OBIS CellX DS 0117 3.pdf


Baseplate Operating Temperature (°C) 10 to 45
Heat Dissipation of Laser Head3 (Watts) Typical 20, Maximum 60
Ambient Temperature4 (°C) 10 to 45
Non-Operating Condition (°C) -20 to +60
Shock Tolerance (6 ms) 30g
Weight (kg) 2.2
ELECTRICAL SPECIFICATIONS

COHR OBIS CellX DS 0719 4.pdf

COHR OBIS CellX DS 0719 4.pdf


Baseplate Operating Temperature (°C) 10 to 45
Heat Dissipation of Laser Head3 (Watts) Typical 20, Maximum 60
Ambient Temperature4 (°C) 10 to 45
Non-Operating Condition (°C) -20 to +60
Shock Tolerance (6 ms) 30g
Weight (kg) 2.2
ELECTRICAL SPECIFICATIONS

Verdi preinstall.book

Verdi preinstall.book

…of the laser head baseplate is monitored by the Verdi power supply
and can be displayed on the power supply front panel. Power dissipation through the baseplate is typically 60 to 80 Watts (100 Watts
maximum). The Verdi will shut down if the baseplate temperature
exceeds 55°C.

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…Option III (> 30 Watts Pump) Diagram
RF synch
Vitara
Head
Water / Air
connections
Optical
connections
Electrical
connections
Vitara
Power Supply
HV 2 HV 2
AC
115 V / 230 V
10 A / 5 A
50 Hz / 60 Hz
AC
115 V…

Lasers for Optogenetics and Multimodal Microscopy

Lasers for Optogenetics and Multimodal Microscopy

…ytterbium-doped fiber.
An example of this is the Coherent Fidelity launched in early 2014. This laser
provides over 2 watts of total power with
a pulse-width of < 60 fs at a fixed output
wavelength of 1070 nm. Combined with
a tunable titanium:sapphire laser such
as…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual
A - 2
Batch Size (Statistics parameter)
Thermopile sensor in watts mode, or
optical sensor
Thermopile sensor in joules mode, or
pyroelectric sensor
1 to 99,999 seconds
2 to 99,999 pulses
Measurement Range (full scale,…

Bio Photonics - April 2018

Bio Photonics - April 2018

…from these latest Yb fiber sources.
As a result, closed, one-box Yb fiber
laser and laser amplifiers are now
offered at powers ranging from
2 to >60 W. This power enables an
OPA to produce multiple watts
of tunable output across the 1- to
1.7-µm window.

COHR HighLightFL1000P DS 0617.pdf

COHR HighLightFL1000P DS 0617.pdf

…EYE EXPOSURE.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
ALIGNMENT LASER DIODE INSTALLED,
MAXIMUM OUTPUT: 5000 WATTS CW
200 mJ MAX., >1 ns PULSE
at wavelengths in the range of
900-1200 nm
CLASS IV LASER PRODUCT
VISIBLE AND/OR INVISIBLE…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions