Search Results

13 - 23 of 23 Products for '730 nm laser' Page 2 of 2 |
Related Categories: Obis 488 | Obis | Obis 405 | Obis 488 Ls | Obis 532

730 nm laser

COHR RLScatalog 2017revA web.pdf

COHR RLScatalog 2017revA web.pdf

…Pump Laser SHBC
Wavelength Range3 (nm) 480 to 2600
Pulse Energy4 (signal + Idler at peak, µJ) >50
Pulse Duration (0.5 - 1) x pump pulse width
Spectral Width (cm-1)(500 nm to 730 nm, 870 nm to 2400 nm) <20
Energy Stability2 (% rms)(500 nm to 700 nm, 900 nm to 2000 nm)

COHR OBISfamily DS 0818 8.pdf

COHR OBISfamily DS 0818 8.pdf

…635 nm to 644 nm range;
660LX with 652 nm to 665 nm range; and 685LX, 730LX, 785LX, 808LX, and 980LX with a ±10 nm range.
2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser

Genesis-Taipan-Series

Genesis-Taipan-Series

…Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 68 mm (4.75 x 1.73 x 2.68 in.)
Weight
Laser Head (g) 730 ±10
Utility and Environmental
Requirements
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid…

Genesis Taipan HD Series Datasheet 2016.pdf

Genesis Taipan HD Series Datasheet 2016.pdf

…Non-condensing
Dimensions (L x W x H)
Laser Head 134.14 x 44 x 64.47 mm (5.28 x 1.73 x 2.54 in.)
Weight
Laser Head (g) 730 ±10
1 Typical value.
2 Measured from the output face, negative value corresponds to a location inside the laser head.
3 Theoretical limit is…

COHR Genesis MX MTM-Series DS 1017 4.pdf

COHR Genesis MX MTM-Series DS 1017 4.pdf

…Non-condensing
Dimensions (L x W x H)
Laser Head5 256 x 49 x 71 mm (10.07 x 1.93 x 2.76 in.)
Weight
Laser Head (g) 730 ±10
Genesis MX MTM-Series Datasheet
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the…

COHR Genesis MX SLM-Series DS 0517 3.pdf

COHR Genesis MX SLM-Series DS 0517 3.pdf

…x H)
Laser Head
121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Measured at the output of the laser head.

COHR Genesis MX STM-Series DS 0517 3.pdf

COHR Genesis MX STM-Series DS 0517 3.pdf

…x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Measured at the output of the laser head.
3…

Genesis-MX-IR-Series-MTM-OEM

Genesis-MX-IR-Series-MTM-OEM

LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATION.
CLASS IV LASER PRODUCT
PER EN60825-1 (2007)
20W MAX. CW LASER
AT 639 nm, 479 nm AND 958 nm
Optical Specifications1 Genesis MX 920-4000 MX 1064-10000 MX 1154-6000
Wavelength (nm) 920…

MATRIX1064&532 DS

MATRIX1064&532 DS

…Power Supply Specifications
MATRIXTM 1064 and 532
Solid-State, Q-Switched Laser
1 1064 -Wavelength (nm); 7 - Specified Power (W); 10 - Specified Pulse Repetition Rate (kHz).
2 1064 -Wavelength (nm); 10 - Specified Power (W); 30 - Specified Pulse Repetition Rate (kHz).
3 At…

Excimer LLO 2014.pdf

Excimer LLO 2014.pdf


(730 × 920 mm), from which, for example, about 55 displays with a 6-in. diagonal are obtained within only a
few thousand laser pulses. Table 2 shows the LLO system
parameters and the calculated throughput parameters for the
two- and single-scan approaches using 380 and 750 nm

Photonics Spectra - September 2016

Photonics Spectra - September 2016

…flexibility by passing an
excimer laser beam (one pulse per area)
through the glass carrier and vaporizing the
top few atomic layers of the polymer. With the
appropriate excimer laser line beam system,
a Generation-4-size glass carrier (730 ×
920 mm) containing 60…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions