Search Results

13 - 24 of 30 Products for '9.4' Page 2 of 3 |

9.4

COHR DIAMOND J-5 DS 1117 1.pdf

COHR DIAMOND J-5 DS 1117 1.pdf

…laser to reach peak powers well in excess of 1 kW in contrast to CW modulated lasers. The J-5 Series lasers are available at 10.6 µm, 10.2 µm, and 9.4 µm and can be operated with pulse repetition rates up to 200 kHz with fast pulse rise and fall times. This combination of wavelength selection, high…

COHR PowerLine DS 1017 3.pdf

COHR PowerLine DS 1017 3.pdf

…mm
(2.19 in.)
27.8 mm
(1.05 in.)
111.2 mm (4.38 in.)
152.4 mm (6.0 in.)
65.0 mm (2.48 in.)
47.6 mm (1.88 in.) 9.4 mm (0.37 in.)
12.7 mm
(0.5 in.)
6.1 mm
(0.24 in.)
28.3 mm
(1.12 in.)
50.8 mm
(2.0 in.)
23.8 mm
(0.94…

COHR DiamondJ-5 DS 0119 1.pdf

COHR DiamondJ-5 DS 0119 1.pdf

…laser to reach peak powers well in excess of 1 kW in contrast to CW modulated lasers. The J-5 Series lasers are available at 10.6 µm, 10.2 µm, and 9.4 µm and can be operated with pulse repetition rates up to 200 kHz with fast pulse rise and fall times. This combination of wavelength selection, high…

COHR HighLightDL HPS DS 0819.pdf

COHR HighLightDL HPS DS 0819.pdf

…50/60 Hz; PE
Connected Load (kVA) approx. 8 approx. 10 approx. 12 approx. 15.5
Effective Power at Nominal Power (kW) approx. 7.6 approx. 9.4 approx. 11.4 approx. 14
Max. Current Consumption at 400 V (A) < 11 < 14 < 17 < 25
Fuses Type NH (A) 16 16 32 32
COOLING…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…C-30 10.6 FieldMaxII-TO PM30
C-40, C-55, C-70 10.6 FieldMaxII-TO PM150
G-100, G-150, E-150 10.2 to 10.7 FieldMaxII-TO PM150
G-100i 9.4 ±0.3 FieldMaxII-TO PM150
K-250, K-225i, K-300 10.4 to 10.8 FieldMaxII-TO PM300F-19
E-400, E-400i, K-500, E-1000 10.2 to 10.8 FieldMaxII-TO…

2009 LMCCatalog86.pdf

2009 LMCCatalog86.pdf

…Power Meter Power Sensor C-30 10.6 FieldMaxII-TO PM30 C-40, C-55, C-70 10.6 FieldMaxII-TO PM150 G-100, G-150 10.2 to 10.7 FieldMaxII-TO PM150 G-100i 9.4 ±0.3 FieldMaxII-TO PM150 K-250, K-225i, K-300 10.4 to 10.8 FieldMaxII-TO PM300F-19 E-400, K-500 10.2 to 10.8 FieldMaxII-TO PM1K GEM Select 50, 100…

CORRECTIVE AND PREVENTIVE ACTION PROCESS

CORRECTIVE AND PREVENTIVE ACTION PROCESS

D127135 Rev.AE
Supplier Quality Requirements Document Page 6 of 8
Worldwide Operations
9.4 Return Material Authorization (RMA)
Suppliers are expected to provide a Return Material Authorization (RMA), within
a maximum of 3 working days after notification of rejected material…

COHR META1.5C DS 0817 2.pdf

COHR META1.5C DS 0817 2.pdf

…1.2 x 1.2m (48 x 48 in.)
Laser Power Control Digital laser power control
Power proportional to velocity
Wavelength (µm) 10.6 and 9.4 available
Exhaust/Vacuum Bed Vacuum material hold-down plenum
External high pressure exhaust blower required
Cooling External chiller…

Polymorph-Characterization-of-Active-Pharmaceutical-Ingredients-Using-Low-Frequency-Raman-Spectroscopy-Web.pdf

Polymorph-Characterization-of-Active-Pharmaceutical-Ingredients-Using-Low-Frequency-Raman-Spectroscopy-Web.pdf

…100.7 13.7 0.44
85.1 17.5 0.32 82.3 15.6 0.28 82.9 19.4 0.23
70.8 11.4 0.39
67.4 5.3 0.09 65.4 13.3 0.62 65.8 11.5 0.41
59.9 9.4 0.75 58.4 7.5 0.33 58.9 6.5 0.47
54.2 3.8 0.16 53.2 4.2 0.22 53.9 5.8 0.46
46.4 12.4 1.00 45.4 13.1 1.00 44.7 11.9 1.00
37.6 4.7 0.25…

SPIE DSS 2013 Final submitted 4-25-2013x

SPIE DSS 2013 Final submitted 4-25-2013x

…to a VHG with diffraction efficiencies of 6.3%, 9.4% and 12.3%,
respectively. Note that the overall linewidth of the stack is limited by the linewidth contributions of the individual bars,
which is this case was highest for the 9.4% diffraction efficiency grating (see figure 17). Further,…

00 M5C Pre Install.book

00 M5C Pre Install.book

…127 mm (5 in)
Working Range
x = 1220 mm (48.0 in)
y = 1220 mm (48.0 in.)
z = 254 mm (10.0 in.)
Laser Wavelength 10.6µm (9.4 µm is available as an option)
Laser Power, Average/Peak (rated)
M5C-2 250W/750
M5C-4 450W/1800
System Dimensions (L xW x H) 1630…

COHR HighLightFL Standard FFC DS 0818.pdf

COHR HighLightFL Standard FFC DS 0818.pdf

…6.9
Effective Power at Nominal Power (kW) 2 2.7 3.4 5.1 6.4
Max. Current Consumption at 400 V (A) 3.2; CCU: 3.7 5; CCU: 5.5 6.3; CCU: 6.8 9.4; CCU: 9.9 11.9; CCU: 12.4
Fuses Type NH (A) 16 25
COOLING
Recommended Cooling Capacity
* (kW) 2.4 3.2 4 6.1 7.7
Flow Rate
*
* (l/h)…