1 - 10 of 94 Search Results for 990-0001
|
|
|
5.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 2 OF 31)
|
|
CAUTION NOTE
PLEASE READ THE COMPLETE MANUAL BEFORE ATTEMPTING
TO OPERATE YOUR LASER. OPERATING LASIRIS LASERS USING
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
AVOID DIRECT EXPOSURE TO THE BEAM.
ALL LASERS MUST BE TURNED…
|
|
|
|
|
6.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 3 OF 31)
|
|
Table of Contents
1. STOCKERYALE'S LASIRIS PRODUCTS ....................................................... 1
2. INCOMING INSPECTION .................................................................................. 1
3. PRODUCT OPERATION...............................................…
Related Searches: snf
|
|
|
|
|
7.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 4 OF 31)
|
|
1
1. StockerYale's Lasiris Products
Your Lasiris product is the result of extensive research and development, and customer
feedback. All instructions should be read prior to operating the laser to ensure its proper
functioning, and more importantly, to ensure the safety of its…
Related Searches: snf
|
|
|
|
|
8.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 5 OF 31)
|
|
2
3. Product Operation
W A R N I N G !
The laser light emitted by this unit may be in the Infrared area of
the electromagnetic spectrum. The laser light may not be visible to
the human eye. Use extreme caution at all times when laser is in
use.
The output power of…
Related Searches: gll
|
|
|
|
|
9.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 6 OF 31)
|
|
3
3.2 For 115 VAC or 220 VAC Operation
The connector at the end of your laser will accommodate our 115 VAC or 220 VAC
transformer power supply. Simply plug the 1/8" male plug connector of the laser into the
power supply. Then, plug the transformer into the wall outlet. Light…
Related Searches: snf
|
|
|
|
|
10.
Microsoft Word - MAN_990-0001_SNF_R12.doc
(PAGE 7 OF 31)
|
|
4
To pulse and/or to modulate the laser power: Mount your laser as desired and follow the
procedure for aligning and focusing (section 4.1). Provide the laser with power (refer to
section 3.1 to 3.6). In addition, supply an appropriate voltage (variable power supply,
computer,…
|
|
