Search Results

1 - 12 of 28 Products for 'Aiming Beam' Page 1 of 3 |

Aiming Beam

QFS 50 OEM 2017.pdf

QFS 50 OEM 2017.pdf

…200 kHz
Pulse duration 150 - 200 ns
Operation mode Q-switched / pulsed
Output power 50 W
Long-term stability ± 1 %
Red aiming beam < 0.2 mW
Optical fiber cable 4.7 m, non-detachable
Minimal bending radius 100 mm
Processing head FLBK SC 46-60/60 or 44-90/60…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…radiation. Even for "eye-safe" classes, never aim the laser beam
at people.
CDRH Class II and IEC Class 1 and Class 2
Considered eye-safe, even when using optical instruments for intrabeam viewing. Normal exposure to this type of beam will not cause
permanent damage to the…

ModeMaster PC User Manual

ModeMaster PC User Manual

…NOTICE!
Do not aim laser beam into ModeMaster PC Scan Head when
ModeMaster PC is off. Focusing beam on rotating drum when
drum is stationary can cause damage even within specified
power ranges.
WARNING!
Alignment should be done with the laser beam at minimum

Life Sciences and Medical Applications

Life Sciences and Medical Applications

…multicenter clinical trials have demonstrated the success of a new 308 nm laser therapy to treat the symptoms of Psoriasis. A beam generated by an excimer laser is aimed precisely at the involved skin without exposing normal skin, reducing the risks of conventional phototherapy such as photoaging.…

Coherent

Coherent

…multicenter clinical trials have demonstrated the success of a new 308 nm laser therapy to treat the symptoms of Psoriasis. A beam generated by an excimer laser is aimed precisely at the involved skin without exposing normal skin, reducing the risks of conventional phototherapy such as photoaging.…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system.
If the optional internal…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

00 E-250 Pre.book

00 E-250 Pre.book

…optional internal shutter assembly, a
red (visible) aiming laser is provided whenever 48 VDC is on and
the shutter is closed. This aiming beam serves as a visual indicator
of the process beam path, and can be used to align the beam delivery
system. This optional internal shutter…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions