Search Results

Refine

Result Type

1 - 12 of 21 Products for 'Air Hose' Page 1 of 2 |

Air Hose

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…- 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit (if supplied) contains particle filter, fittings
and coolant hose required to provide coolant to the laser
system from the…

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book

…with neutral and ground,
380-420 VAC, 50-60 HZ, 32A
Network Connection - (RJ45 Cable)
Compressed Dry Air, 60-80 PSI
(¼"OD Tubing)
Exhaust
Flexible Hose - (6"OD)
CuttingAssistGas2-(3/8NPTMaleFitting)
(Option - CDA, Oxygen)
Min. Pressure: 60 PSI
Max.…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant
hose required to provide coolant to the laser system from
the…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant
hose required to provide coolant to the laser system from
the…

00 LMT Pre.book

00 LMT Pre.book

…Exhaust Hose Flex hose from plenum.
2 1 Exhaust Mount Bracket Mounts on inside. See
3 2 Hose Clamps Secure flexible hose to plenum connector sleeve.
4 1 Connector Sleeve Mounted inside with exhaust mounting bracket.
5 2 Hose Adaptor Mounted at the ends of flexible hose.
6 5…

00 E-250 Pre.book

00 E-250 Pre.book

…- 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit (if supplied) contains particle filter, fittings
and coolant hose required to provide coolant to the laser
system from the…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…Measured from system inlet to outlet ports and does not include the pressure drop from chiller fittings or the
supply and return hose.
(5) Clean dry air or nitrogen are acceptable as purge gases. Coherent can recommend suitable commercial gas
filter/dryers.
(6) Relative humidity…

00 M5C Pre Install.book

00 M5C Pre Install.book

Hose Flex hose from plenum.
2 1 Exhaust Mount Bracket Mounts on inside. See Figure 3-10
3 2 Hose Clamps Secure flexible hose to plenum connector sleeve.
4 1 Connector Sleeve Mounted inside with exhaust mounting bracket.
5 2 Hose Adapter Mounted at the ends of flexible hose.

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…- 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit (if supplied) contains particle filter, fittings and
coolant hose required to provide coolant to the laser system
from the…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…coolant - 30 micron or better
3/8" male NPT to male GHT (garden hose thread)
3/8" male NPT to female GHT (garden hose thread)
Coolant hoses
Coolant kit contains particle filter, fittings and coolant hose
required to provide coolant to the laser system from the

Picosecond laser

Picosecond laser

…RAPID 18 of 27
We recommend to leave enough space around the rack unit for
the electrical wires, water hoses, optical fibers and service
access. Please ensure sufficient air ventilation is provided to
allow the heat exchange from the chiller (in case of water-toair chiller) to…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…meet the requirements stated in "Coolant
Composition" on page 10. Refer to "Laser System Cooling" on
page 8 and "Installation" on page 21 for additional information.
The recommended hose for coolant consists of a 5/8 inch (16 mm)
minimum ID hoses up to 15 m (50 ft.) total.