Search Results

1 - 12 of 37 Products for 'Ar Laser' Page 1 of 4 |

Ar Laser

Solar High Efficiency AR Coatings

Solar High Efficiency AR Coatings

…expensive products, which cannot be performed with the aforementioned lasers, and which justify the use of an inherently more sophisticated and costly laser source such as a picosecond pulsewidth laser. Minimizing heat damage Laser marking is the process of inducing a color change in a surface, or…

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…to avoid direct feedback into the laser.
· Beware of focusing the light output on a highly reflective/scattering surface. This is another
means of generating high optical feedback to the diode.
· If fiber coupling, anti-reflective (AR) coated tips are recommended for multimode…

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

Microsoft Word - 115-80046-001 RO USB Laser Module Manual.doc

…to avoid direct feedback into the laser.
· Beware of focusing the light output on a highly reflective/scattering surface. This is another
means of generating high optical feedback to the diode.
· If fiber coupling, anti-reflective (AR) coated tips are recommended for multimode…

High Power 7-GHz Bandwidth External-Cavity Diode Laser Array and Its Use in Optically Pumping Singlet Delta Oxygen.pdf

High Power 7-GHz Bandwidth External-Cavity Diode Laser Array and Its Use in Optically Pumping Singlet Delta Oxygen.pdf

…microlenses and VBG are all AR coated.
DLA FAC SAC VBG
14 mm
FA
SA
a
b
Fig. 1. Structure of external-cavity diode laser array (ECDLA). A volume Bragg grating (VBG)
is used to provide narrow-band optical feedback to a diode laser array (DLA). Between the

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…gas supply is directed to both the laser system and
the beam delivery system, make certain the supply and supply line
are properly sized to provide an adequate flow rate to the laser
system.
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Operator's Manual
3 - 12
NOTICE!
Other inert gases such as argon (Ar) must not be used. Use of
inert gases will result in damage to the RF power module and
associated matching network components. Only nitrogen or
compressed air as described…

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

…analyzer with 10 pm resolution. The linewidth was not measured. The diode laser is
an off-the-shelf 80 mW single mode Fabry-Perot laser with standard facet coating (>10%).
The lens is a 3.6 mm focal length AR coated radial gradient index lens. The side mode
suppression ratio…