Search Results

1 - 12 of 32 Products for 'Argon Laser' Page 1 of 3 |

Argon Laser

INNOVA 300C Laser

INNOVA 300C Laser

…0.25 I-310 Argon Systems with Sealed Mirror - Visible Region Multiline Visible 2 10.0 I-324 I-325 I-326 I-328 Argon Systems with Sealed Mirror - UV Region Multiline UV 3 0.20 0.40 0.50 1.00 UV 363.8 0.07 0.14 0.18 0.36 UV 351.1 0.09 0.18 0.22 0.44 I-304 I-305 I-306 I-307 I-308 Argon Single Frequency…

INNOVA 70C Ion Laser | Coherent

INNOVA 70C Ion Laser | Coherent

…output in the multi-watt regime
* Argon, Krypton, and Mixed-gas models Datasheet INNOVA 70C Applications Application Process Material Life Sciences Scientific Confocal Microscopy Flow Cytometry Laser Doppler Velocimetry Fluorescence Excitation Dye Laser Ti:Sapphire Laser --> Features & Benefits…

Ion Lasers

Ion Lasers

…applications. If you have requirements for one or more of the following, a Coherent ion laser may be the right solution for your application:
* Continuous wave radiation at one or more of the available Argon or Krypton transitions which span the spectrum from the UV to the IR
* Relatively high…

INNOVA Sabre Laser | Coherent

INNOVA Sabre Laser | Coherent

…Microelectronics Scientific Graphic Arts Holography Laser Direct Imaging (LDI) Lithography Photographic Film Photoresist Dye Laser Ti:Sapphire Laser Plastic Paper Fluorescence Excitation --> Features & Benefits Argon DBW Innova Sabre Argon System with Dual Brewster Window (DBW) Tubes Power…

Laser Focus World - May 2015

Laser Focus World - May 2015

…with argon gas to allow generation of coherent
EUV pulses with photon energies up to 43 eV. These EUV pulses are ideal for photoelectron spectroscopy, used to study electron dynamics in materials.
Supercontinuum generation
Supercontinuum light sources combine an ultrafast laser

Advances in Diode Lasers and OPSLs

Advances in Diode Lasers and OPSLs

…the argon ion laser. And HeCd lasers for many years were used in CW UV light applications such as stereolithography. Conversely, these lasers have many cons which are well-documented. They have a large size to power Table 1. Most commonly applied wavelengths (in nm) of ion, HeCd, diode lasers and…

Mira Family

Mira Family

…in a laser that stands alone as the market leader in terms of ease-of-use, performance and reliability. In particular, Verdi pumping ensures the highest power stability and lowest noise ultrafast performance commercially available. Mira may also be pumped by Coherent’s argon ion laser systems.…

INNOVA 90C

INNOVA 90C

…except multiline visible and IR, are TEM00. 2 All beam specifications are measured at specified output powers at 514.5 nm for argon lasers and 47.1 nm for krypton lasers. 3 Beam diameter is measured at the output-coupler mirror. 4 Inside the resonator, the beam waist is located at the flat high…

Microelectronics

Microelectronics

…and as deep UV as possible. This can be either a frequency doubled Argon Laser (FreD) or a frequency doubled solid-state green laser such as Azure. Unfortunately, it is difficult to test these optical components with a pulsed laser system. The Innova 300 FreD provides a lower power CW UV source that…

Life Sciences and Medical Applications

Life Sciences and Medical Applications

…diode-pumped lasers, optically pumped semiconductor lasers (OPSL), and ion lasers. For excitation at fixed wavelengths with CW solid-state lasers, Coherent offers the Sapphire SF single-frequency OPSL series with wavelengths at 488 nm and 532 nm. The Innova 300C and 70C series of small-frame argon

Laser Focus World - August 2016

Laser Focus World - August 2016

August 2016 www.laserfocusworld.com Laser Focus World
30
MarketInsights
thus came to dominate flow cytometry
in the 1980s. Over time, however, the
ongoing evolution of highly reliable and
compact air-cooled argon lasers enabled
construction of smaller (though still…

Laser Focus World - November 2017

Laser Focus World - November 2017

…The flap is then
replaced, sealing and
protecting the front of
the eye.
The precision of the
193 nm argon fluoride
(ArF) excimer laser ablation process is
essential for the predictability and safety
of the LASIK procedure. Plus, the short
(nanosecond)…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions