Search Results

1 - 12 of 138 Products for 'Beam Aligner' Page 1 of 12 |

Beam Aligner

COHR WP  OPSL Invariant Beam Properties final 5.3.18.pdf

COHR WP OPSL Invariant Beam Properties final 5.3.18.pdf

…advantages is the freedom to adjust the output power over a large range (10-100%) with no effect on, important output beam parameters, including beam divergence, beam shape and beam pointing. The Advantages of Independent Power Adjustment The ability to vary laser output power or to operate a laser…

Microsoft Word - Understand Different Laser Beam  Rev 1 Final.doc

Microsoft Word - Understand Different Laser Beam Rev 1 Final.doc

…a portion of
the beam.
The disadvantages are:
· The transmitted power through the pinhole is very small
· Aligning the pinhole is difficult and time-consuming
· Multiple positional measurements are needed to generate
a profile of the entire beam, which can take up a lot…

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

Microsoft Word - Understanding Laser Beam Parameters Leads to Better System Performance and Can Save Money Final.doc

…or profile of a laser beam may not be sufficient to predict its ability to be
focused, in which case the use of a beam propagation analyzer (M² meter) is needed. In fact, the performance and
reliability of beam delivery systems is strongly affected by both alignment and focus.
The…

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

beam from the laser diode is oriented such that the beam propagates
through the polarizing beam splitter. A double pass through the quarter waveplate rotates the
polarization of the diffracted beams by 90 degrees, such that the polarizing beam-splitter
reflects the diffracted beams

ModeMaster PC User Manual

ModeMaster PC User Manual

alignment. If your
laser source becomes unstable, change the Scan Head alignment
and focus again.
Two beams may be aligned for coincidence by adjusting the scan
head to be aligned with the first beam. Then block the first beam and
adjust the alignment of the second beam to…

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book

…machine, advanced beam alignment
and leveling must be done whenever the machine is moved or
shipped.
This section contains information required to plan the installation
site, unpack and inspect the system, perform the physical installation, perform alignments and verifications…

00 LMT Pre.book

00 LMT Pre.book

…machine, advanced beam alignment and leveling
must be done whenever the machine is moved or shipped.
This section contains information required to plan the installation
site, unpack and inspect the system, perform the physical installation, perform alignments and verifications…

COHR PowerLine AVIANX DS 0519.pdf

COHR PowerLine AVIANX DS 0519.pdf

…(W x H x L) 381 x 292 x 1280.5 mm (15.0 x 11.5 x 50.4 in.)
CONFIGURATION
Galvanometer Scanner
F-Theta or Telecentric Lens
Beam Alignment Box
VLM Software
Supply Unit
OPTIONS
Fast-Focusing Module
Internal Power Meter
Through-the-Lens Alignment

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…Feet Since all E-1000 Series laser beams are precisely aligned with reference to three kinematic mounting feet, it is recommended that laser
integrators utilize this mounting feature. Refer to the mechanical
drawing in Figure 18.
Because beam pointing is virtually identical for…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…measurements--the beam can be focused at
a distance for the smallest spot size to optimize the
system resolution.
The front knob allows for easy adjustment. During
adjustment the optics do not rotate and focusing
action is even and uniform while beam alignment
is…

Laser Focus World - September 2015

Laser Focus World - September 2015

…position,"
which allows the alignment of the centroid of one laser beam to that of a second beam--handy for use with Quantel's
EverGreen dual laser product. Billings
notes that the Gentec system enables
Quantel to align the dual laser beams so
that they are collinear to…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf


The precision 5-axis head mount and beam position display of the ModeMaster PC provide easy angular alignment and
translational centering of the lens and scan axis to the beam propagation path.
Beam diameter is a critical parameter in beam propagation measurements. Second-moment…