Search Results

1 - 12 of 63 Products for 'Beam Shutter' Page 1 of 6 |

Beam Shutter

00 E-250 Pre.book

00 E-250 Pre.book

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

Genesis MX SLM Series Lasers

Genesis MX SLM Series Lasers

…Applications Specs Genesis MX SLM Power Up to 1W visible Standard Wavelengths 460 nm to 639 nm Beam Quality M 2 < 1.1 Noise % RMS < 0.1% Stability 8 Hours < ± 1% Features Collimation and shutter options Genesis MX SLM Software Software Description CohrHOPS DLL (CohrHopsDemo v2.0.7, DLL) Dynamic…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

High-Power Continuous Wave (CW) l Genesis MX MTM Series Lasers

High-Power Continuous Wave (CW) l Genesis MX MTM Series Lasers

…Applications Specs Genesis MX MTM Power Up to 8W visible, 10W IR Standard Wavelengths 460 nm to 1154 nm Beam Quality M 2 ~ 5 Noise % RMS < 1% Stability 8 Hours < ± 1% Features Collimation, shutter, and fiber coupling options Genesis MX MTM Software Software Description CohrHOPS DLL (CohrHopsDemo…

Genesis MX-Series

Genesis MX-Series

…wavelengths from 460 nm to 639 nm, with up to 1W of output power. The Genesis MX MTM-Series, intended for medical and defense applications, has high beam quality and is available at wavelengths ranging from 460 nm to 1154 nm with up to 10W of output power. The Genesis MX SLM-Series (TEM00) is…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

Genesis MX STM Series

Genesis MX STM Series

…Applications Specs Genesis MX STM Power Up to 1W visible Standard Wavelengths 460 nm to 639 nm Beam Quality M 2 < 1.1 Noise % RMS < 0.1% Stability 8 Hours < ± 1% Features Collimation and shutter options Genesis MX STM Software Software Description CohrHOPS DLL (CohrHopsDemo v2.0.7, DLL) Dynamic…

UV Optical Components

UV Optical Components

…for high thermal stability. Compensator plate 60 x 35 x 2 mm 3 to compensate for any beam displacement. With manual knob and digital scale for accurate transmittance setting. Electromagnetic shutter. Attenuator Module, Motorized Variable attenuation substrate 60 x 35 x 2 mm 3 with inverse…

AVIA NX nanosecond laser

AVIA NX nanosecond laser

…upgrade. And if you’re already using AVIA lasers, upgrade is very simple because AVIA NX is backwards compatible delivers exactly the same unmatched beam parameters as earlier models and uses common software commands. The end result is lower cost of integration, lower cost of ownership and greater…

RAPID FX

RAPID FX

…in a highly thermally stable amplifier with superior beam stability. Both pulse-to-pulse energy stability and beam pointing stability deliver best-in-class performance among femtosecond micromachining products. With the integrated process shutter, the user can select single pulses out of the 100 kHz…

Microsoft Word - Understand Different Laser Beam  Rev 1 Final.doc

Microsoft Word - Understand Different Laser Beam Rev 1 Final.doc

…is that
beam expansion is not required to accurately measure extremely
small beams.
Power (or Energy) of the Beam
The power or energy of the beam is another important point that
can influence the choice of beam profiling technology. In general,
beam analyzers are…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

beam blocking purpose
only. This shutter is not to be used for beam modulation (as a
`process shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter