Search Results

13 - 24 of 71 Products for 'Beam Shutter' Page 2 of 6 |

Beam Shutter

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…only.
This shutter is not to be used for beam modulation (as a `process
shutter').
Table 4-7. Extended Interface Signal Descriptions
IDENTIFICATION BRIEF DESCRIPTION CONNECTION
INPUT SIGNALS
Shutter Command
Opens and closes shutter (if shutter option is

COHR OBIS LG DS 0118 8.pdf

COHR OBIS LG DS 0118 8.pdf


(1.28 in.)
10.0 mm
(0.39 in.)
49.5 mm
(1.95 in.)
125.0 mm (4.92 in.)
Emission
Indicator
Output Beam
Shutter
Control
0.126 ±0.0005 X 0.188
Deep Slot and Hole
for Alignment Pins
M4-0.7 X 4.0 mm Deep Mounting Holes (4X)

COHR ExcimerCatalog2019.pdf

COHR ExcimerCatalog2019.pdf


Safety Options
Class 1 Housing
Automated Safety Class 3 Interlock Circuit
Automated Beam Shutter for 193 nm
Automated Beam Shutter for 248 nm
Automated Beam Shutter for 308 nm
Part Number
1161814
1161815
1161816
1161817
1161818
1161819…

COHR ExcimerCatalog2020 final lr.pdf

COHR ExcimerCatalog2020 final lr.pdf


Safety Options
Class 1 Housing
Automated Safety Class 3 Interlock Circuit
Automated Beam Shutter for 193 nm
Automated Beam Shutter for 248 nm
Automated Beam Shutter for 308 nm
Part Number
1161814
1161815
1161816
1161817
1161818
1161819…

COHR ExcimerCatalog2020 int 0320.pdf

COHR ExcimerCatalog2020 int 0320.pdf


Safety Options
Class 1 Housing
Automated Safety Class 3 Interlock Circuit
Automated Beam Shutter for 193 nm
Automated Beam Shutter for 248 nm
Automated Beam Shutter for 308 nm
Part Number
1161814
1161815
1161816
1161817
1161818
1161819…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…(2.76 in.)
55.0 mm
(2.17 in.)
115.0 mm
(4.53 in.)
125.0 mm
(4.92 in.)
Emission
Indicator
Output Beam
Shutter Control
Mounting Holes
for 3 mm or No. 4 Screws
(4X)
USB Control Fan
Status
Indicators
Heat Sink Surface…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…requirements is
certified by the CE mark.
Shutter Operation The EMBS (Electro-Magnetic Beam Shutter) is fail-safe related to
Category 3 and PL d acc. to EN ISO 13849-1. It is normally closed
and closes in direction of gravity. The shutter status is monitored
continuously via…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…Laser Beam
Output
The Magnum II generates a beam via its exit aperture--refer to
Figure 2-1 (p. 2-1).
Shutter The shutter should be kept closed when the laser is not in use--refer
to Figure 2-1 (p. 2-1). Before turning ON the power, the shutter
should be opened (shutter

Avia preinstall.book

Avia preinstall.book

…the
shutter is open, the laser beam is allowed to exit the laser. A closed shutter blocks
the beam.
11 Shutter State Refer to pin 10.
12 Shutter Command Input signal that opens and closes the shutter. Apply more than 3.0 V referenced to
pin 13 to close the shutter. Leave…

Innova Sabre brochure

Innova Sabre brochure

…This system maintains
cavity length for faster warm-up and
stable single-frequency operation.
External Shutter
Sabre's shutter safely blocks the output
beam without interrupting lasing. It can
be accessed through the remote module
or be used as a component of your…