Search Results

Refine

Result Type

37 - 48 of 48 Products for 'Bend Radius' Page 4 of 4 |

Bend Radius

COHR SapphireFP DS 1017 1.pdf

COHR SapphireFP DS 1017 1.pdf

…via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
4 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
5 If user-supplied, the DC power…

COHR SapphireSF DS 0719 3.pdf

COHR SapphireSF DS 0719 3.pdf

…via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
6 If user-supplied, the DC power…

COHR SapphireSF DS 0819 1.pdf

COHR SapphireSF DS 0819 1.pdf

…via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
6 If user-supplied, the DC power…

COHR SapphireFP DS 1119 1.pdf

COHR SapphireFP DS 1119 1.pdf

…via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
3 Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
4 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
5 If user-supplied, the DC power…

COHR SapphireSF DS 1119 1.pdf

COHR SapphireSF DS 1119 1.pdf

…via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
4 Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
6 If user-supplied, the DC power…

OBIS Galaxy Datasheet COHR 2018.pdf

OBIS Galaxy Datasheet COHR 2018.pdf

…FC/PC8
0.055
0.065
Mode Field Diameter (m) (typical) 3
Spatial Mode TEM00
M2 (Beam Quality)5 1.1
Fiber Minimum Bend Radius 51 mm (2.0 in.)
Fiber Tensile Load (maximum) 1 kg (2.2 lbs.)
Fiber Connector Type (internal to OBIS Galaxy) FC form-factor, ultra-flat…

COHR OBIS Galaxy DS 0519 3.pdf

COHR OBIS Galaxy DS 0519 3.pdf

…FC/PC8
0.055
0.065
Mode Field Diameter (m) (typical) 3
Spatial Mode TEM00
M2 (Beam Quality)5 1.1
Fiber Minimum Bend Radius 51 mm (2.0 in.)
Fiber Tensile Load (maximum) 1 kg (2.2 lbs.)
Fiber Connector Type (internal to OBIS Galaxy) FC form-factor, ultra-flat…

QFS 50 2017.pdf

QFS 50 2017.pdf

…Output power 50 W
Long-term stability ± 1 %
Red aiming beam < 0.2 mW
Optical fiber cable 4.7 m, non-detachable
Minimal bending radius 100 mm
Processing head FLBK 46-90/60 or 44-60/60 or 25-90/60
Dimensions processing head 200 x 540 x approx. 550 mm (w x h x d)

QFS 50 OEM 2017.pdf

QFS 50 OEM 2017.pdf

…Output power 50 W
Long-term stability ± 1 %
Red aiming beam < 0.2 mW
Optical fiber cable 4.7 m, non-detachable
Minimal bending radius 100 mm
Processing head FLBK SC 46-60/60 or 44-90/60 or 25-90/60
Dimensions processing head 200 x 540 x approx. 550 mm (w x h x d)…

QFS 50 With FLBK SC 2017.pdf

QFS 50 With FLBK SC 2017.pdf

…Output power 50 W
Long-term stability ± 1 %
Red aiming beam < 0.2 mW
Optical fiber cable 4.7 m, non-detachable
Minimal bending radius 100 mm
Processing head FLBK 46-90/60 or 44-60/60 or 25-90/60
Dimensions processing head 200 x 540 x approx. 550 mm (w x h x d)

QFS 50 With FLBK SC OEM 2017.pdf

QFS 50 With FLBK SC OEM 2017.pdf

…Output power 50 W
Long-term stability ± 1 %
Red aiming beam < 0.2 mW
Optical fiber cable 4.7 m, non-detachable
Minimal bending radius 100 mm
Processing head FLBK SC 46-60/60 or 44-90/60 or 25-90/60
Dimensions processing head 200 x 540 x approx. 550 mm (w x h x d)…

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

…than those produced by mechanical cutting.
And the advantage of laser cutting is better
edge quality, which directly translates into
bend strength.
Nanosecond pulse-width lasers, operating
in either the green (532-nm) or ultraviolet
(355-nm) bands, usually enter through…