Search Results

Refine
1 - 12 of 13 Products for 'Bnc Adapter' Page 1 of 2 |

Bnc Adapter

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

…sensor adapter to power the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors. The J-Power Pro is a compact sensor adapter that powers the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors and passes the raw output voltage of the sensor directly to the BNC connector.…

Thermal SmartSensor Adapter DSrevA 4.qxd

Thermal SmartSensor Adapter DSrevA 4.qxd

…this printing, the SmartSensor Adapter has not been released. Please inquire about availability. The JSA-BNC Adapter is used to convert a BNC terminated energy sensor for use with 3sigma, FieldMax-TOP, and FieldMax-P. Each sensor must have a unique JSA-BNC adapter programmed with its specific…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…input (BNC adapter incl.) -
GPIB PC interface port -
Part Number
* 1104620 1104622
*
* 1104619
*
*
Device
Specifications

* Meter supplied with 4400 mAH Li-ion battery, AC power adapter, power cord, 1.8-meter USB cable, RS-232 adapter, USB flash drive, RCA-to-BNC adapters,

LabMax PC Software Installation and Quick Start Guide

LabMax PC Software Installation and Quick Start Guide

…or optical
sensor to the 25-pin connector
and turn the meter ON.
Note: Contact Coherent if the
sensor has a BNC plug and did
not ship with a 25-pin adapter
(refer to the "Calibration and
Warranty" section of the User
manual for contact information).

FieldMaxII-P User Manual

FieldMaxII-P User Manual

…a Pyroelectric Sensor
Connect a pyroelectric sensor to the
25-pin connector. Note: If your sensor
has a BNC plug, you will need to attach
a 25-pin adapter.

Press either the Up or Down
arrow to manually select the range.
Take the measurement and observe the result…

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…to select Joules mode.

Connect a pyroelectric sensor to the
25-pin connector. Note: If your sensor
has a BNC plug, you will need to attach
a 25-pin adapter.

Press either the Up or Down
arrow to manually select the range.
Note: Auto Range is not
available for…

FMII-P QuickStartGuideRevAD.fm

FMII-P QuickStartGuideRevAD.fm

…measurement
Connect a pyroelectric sensor to the
FieldMaxII-P 25-pin connector. Note: If your sensor
has a BNC plug, you will need to attach
a 25-pin adapter.
n
o
Press either the Up
or Down arrow to
manually select the
range.
Adjust the trigger…

book.book

book.book

ix
6-11. Dimensions - Adapter Plate for Heat Sink Mount .................................................................6-5
6-10. Adapter Plate for Heat Sink Mount.........................................................................................6-5
6-13. Dimensions -…

LabMax Meters DS 8.qxd

LabMax Meters DS 8.qxd


LabMax-TO (power only) 1104619
1 Meter supplied with 4400 mAH Li-ion battery, AC power adapter, power cord, 6-ft. USB cable, RS-232 adapter, 256 MB USB flash stick,
three RCA-to-BNC adapters, user manual, software and driver CD, soft carrying case, and certificate of calibration.

FMII-TOP QuickStartGuideRevAD.fm

FMII-TOP QuickStartGuideRevAD.fm

…an energy or average power measurement.
o
Connect a pyroelectric sensor to the
25-pin connector. Note: If your sensor
has a BNC plug, you will need to attach
a 25-pin adapter.n
Press either the Up or
Down arrow to manually
select the range. Note:
Auto…

LabMax-Pro-Data-Sheet FORMFIRST.pdf

LabMax-Pro-Data-Sheet FORMFIRST.pdf

…300 ohm DC impedance)
Power jack (12VDC - center positive)
Part Number1 1268881
Laser Power and Energy Meter
LabMax-Pro SSIM
1 Meter supplied with AC power adapter, power cord, USB cable, BNC-to-SMB trigger cable, software and driver CD, and certificate of calibration.

LabMax Meters DS

LabMax Meters DS

…(RoHS)
* 1104620 1104622 1104619

* Meter supplied with 4400 mAH Li-ion battery, AC power adapter, power cord, 1.8-meter USB cable, RS-232 adapter, USB flash drive,
three RCA-to-BNC adapters, user manual, software and driver CD, soft carrying case, and certificate of calibration. LabMax-TOP…