…the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors. The J-Power Pro is a compact sensor adapter that powers the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors and passes the raw output voltage of the sensor directly to the BNC connector. The peak voltage of…
…J-Power Pro is a compact sensor adapter
that powers the active sensor circuit in DB-25
EnergyMax and PowerMax-Pro sensors and
passes the raw output voltage of the sensor
directly to the BNC connector. The peak voltage of the output (as referenced from baseline
Laser Power and Energy Meters
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent's LabMax meters are compliant with the EU Restriction of Hazardous Substances (RoHS) and Waste Electrical and…
…pins 24 and 25 or on the front panel, before diode
current and pulsing can be again enabled.
25 Reset Fault Refer to pin 24.
Table 6. BNC Connectors
Pulse Trigger In The rising edge TTL input will trigger a laser pulse (See Section Three, Operation,
DB25 connector that provides extended capability (including shutter
control and additional fault signals).
5 Shutter LED LED illuminates when the (optional) internal shutter is open.
Real Time I/O
DB25 connector that supplies…
at 20 KHz high speed 0.2
Sensor Compatibility PM Model Thermopile; PowerMax-Pro; LM Model Thermopile, OP-2 & LM-2 Optical,
DB-25 EnergyMax pyroelectric
Measurement Range Sensor dependent (reference sensor specifications)
Digital Meter ±1
…parameter; Select and change numerical values
Left Side Panel Power jack
USB PC interface port
Ride Side Panel DB-25 sensor port
Part Number (RoHS)
* 1098580 1098579 1098581
* Meter supplied with NiMH rechargeable…
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.