Search Results

1 - 12 of 35 Products for 'Burst Mode' Page 1 of 3 |

Burst Mode

HyperRapid NX/NXT - Industrial Picosecond Laser

HyperRapid NX/NXT - Industrial Picosecond Laser

…shutter allows both on/off control and energy attenuation for each individual pulse. Burst mode can be selected to determine how many 10 ps-pulses with 25 ns separation should be released in an envelope. These bursts enhance the ablation rate in many materials and increase the process efficiency.…

COHR MonacoSmartCleave DS 0318 4.pdf

COHR MonacoSmartCleave DS 0318 4.pdf


Output Power (W) 40 60
Energy (µJ) 40 (at 1 MHz) 80 (at 750 kHz)
Seeder Burst Mode (µJ) (max. energy) >200 >320
Seeder Burst Count (µJ) (max. energy) 5 x 40 4 x 80
Seeder Burst Mode Repetition Rate (kHz) (max. energy) 200 188
Native Repetition Rate Single-shot to…

RAPID-NX-Data-Sheet-06-23-14.pdf

RAPID-NX-Data-Sheet-06-23-14.pdf

…seeder burst operation, providing a burst of pulses with only 25 ns time separation between pulses. The RAPID NX distinguishes itself from the other ps-lasers by a significantly reduced footprint, weight and operating cost. As a standard feature, the RAPID NX offers pulse-on-demand. In this mode, a…

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…structuring of large surfaces with line focusing or multiple beams The HYPER RAPID 50 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 50W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for…

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

PowerMax-Pro-White-Paper-Novel-Laser-Power-Sensor-Improves-Process-Control FORMFIRST.pdf

…that can be obtained in this mode.
Coherent PowerMax-Pro
Figure 4
Pulse Shape Visualization Obtained with a PowerMax-Pro
Sensor and LabMax-Pro Electronics and Software
The second High Speed mode is called "Snapshot
Mode," which provides burst sampling at a rate of 625…

RAPID NX Laser

RAPID NX Laser

…offers Features & Benefits
* 7W at 1064 nm
* Repetition rate range from 50 kHz to 1000 kHz
* Up to 50µJ pulse energy
* Pulse on demand
* Burst mode
* High beam quality M2 100:1 Polarisation direction Vertical ± 3 degrees IR Contrast ratio > 100:1 Defined as the energy ratio of the main pulse…

COHR Monaco1035 DS 0318 5.pdf

COHR Monaco1035 DS 0318 5.pdf

…80 (at 750 kHz)
Seeder Burst Mode (µJ) >200 >200 >320
Repetition Rate Single-shot to 1 MHz, higher rep. rates without AOM pulsepicking:
1 to 50 MHz standard
Pulsewidth (fs) <350
Tuning Range <350 fs to >10 ps
Spatial Mode TEM00, M2 <1.2
Beam…

COHR HRNX SmartCleave DS 0718 3.pdf

COHR HRNX SmartCleave DS 0718 3.pdf

…dashboard cutting (right)
HyperRapid NX Smartcleave Burst Mode Operation
Oscilloscope trace showing 5 pulses in the burst at 100 kHz repetition rate. The pulses in the burst are separated by 25 ns
Time (a.u.)
Signal (a.u.)
10 µs Burst
Spacing
for 100 kHz

HYPERRAPID100 DS 0414 5.pdf

HYPERRAPID100 DS 0414 5.pdf

Superior Reliability & Performance HYPER RAPID 100 The HYPER RAPID 100 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 100W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser…

HYPER RAPID Lasers

HYPER RAPID Lasers

…micromachining. The newest member of this industrial ultrafast laser family, the HYPER RAPID 100 is the first ever to offer pulse-on-demand and burst mode operation in a 100W laser system, enabling a whole range of new processes for machining brittle materials such as ceramics, sapphire and glass.…

COHR HyperRapidNX DS 0618 1.pdf

COHR HyperRapidNX DS 0618 1.pdf

…repetition rate).
5 Single-pulse operation (burst number = 1).
6 At 500 kHz.
7 Over 8 hours, ±1°C ambient temperature.
8 With 5 pulses in the burst, at the lowest burst mode operation range frequency.
9 (Pulse repetition rate) x (number of burst) cannot exceed 5 MHz.

Avia preinstall.book

Avia preinstall.book

…measured voltage across the battery, nn.nn, in volts.
PRINT BURST MODE
?BM
Returns Burst Mode operation:
0 = Continuous
1 = Pulsed
PRINT BURST PULSES
?BP
Returns the number of pulses in a burst. Number of pulses is 1 to 255.
PRINT CRYSTAL WARNING