Search Results

Refine

Result Type

1 - 12 of 36 Products for 'C 70 Manual' Page 1 of 3 |

C 70 Manual

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

System Description
1 - 13
Figure 1-6. J-5 Series Dimensions (including clearance)
17.8 mm
[.70 in.]
111.8 mm
[4.40 in.]
1016 mm
[40.0 in.]
MIN CLEARANCE
REQUIRED FOR
RF MODULE
REMOVAL
227.6 mm
[8.96 in.]
4X M4X0.7 - 6H

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

Laser Controller
4 - 5
USB Connector This Mini-B connector lets you connect a PC to
the Coherent BioRay Controller and send
commands. The commands pass to the laser by
RS-232. The controller changes the USB signal
to RS-232.
Specifications
Table 4-2. Coherent…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…is not exactly the
same as the laser diode ground.
Figure 2-5. Temperature Monitoring Voltage vs. Temperature
Temp (°C)
Vtemp (Volts)
0 70
65
60
55
50
45
40
35
30
25
20
15
10
5
0.4
2
1.8

FieldMate DS 4.qxd

FieldMate DS 4.qxd

…please refer to the
Service and Support section at www.Coherent.com or contact your
local Sales and Service Representative.
C O H E R E N T, I N C .
7470 SW Bridgeport Road
Portland, OR 97224-7286
phone (800) 343-4912
(971) 327-2700
fax (971) 327-2778

COHR OBIS SingleLaserRemote DS 0317 1.pdf

COHR OBIS SingleLaserRemote DS 0317 1.pdf

…user manual
Power Consumption (W) (typical) 1 (laser not included)
Power Consumption (W) (maximum) 2 (laser not included)
Power Input Universal IEC-320
Power Cord (USA) 2.4m (8 ft.)
Operating Condition4 (°C) 0 to 40
Non-operating Condition4 (°C) -10 to +70
Shock…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf


Front Panel
PWR Toggle power
ZERO Ambient offset
AUTO Engage auto-ranging
Enter wavelength compensation
ARROW KEYS Manually control range; select and change numerical values
Left Side Panel Power jack
Analog output
DB-25 sensor port
Part Number
*…

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

…m (operating)
< 12,000 m (storage)
Relative Humidity
< 90% (5 to 40° C) (operating)
< 95% (0 to 70° C) (storage)
Temperature
5 to 40° C (operating)
-20 to 70° C (storage)
Ranges
Area Parameter (entered as a diameter) 0.01 to 999.99 mm

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual

…m (operating)
< 12,000 m (storage)
Relative Humidity
< 90% (5 to 40° C) (operating)
< 95% (0 to 70° C) (storage)
Temperature
5 to 40° C (operating)
-20 to 70° C (storage)
Ranges
Area Parameter (entered as a diameter) 0.01 to 999.99 mm

FieldMaxII-P User Manual

FieldMaxII-P User Manual

…m (operating)
< 12,000 m (storage)
Relative Humidity
< 90% (5 to 40° C) (operating)
< 95% (0 to 70° C) (storage)
Temperature
5 to 40° C (operating)
-20 to 70° C (storage)
Ranges
Area Parameter (entered as a diameter) 0.01 to 999.99 mm

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

Specifications
A - 1
APPENDIX A: SPECIFICATIONS
Meter
Specifications
This appendix lists specifications for the LabMax-Pro SSIM Laser
Power Meter.
Table A-1. Specifications (Sheet 1 of 2)
Parameter Description
Measurement Resolution (%) (full-scale)

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC


BEAM
POLARIZATION
OUTPUT BEAM C
L
CLEAR ACCESS WITHIN THIS ZONE
REQUIRED FOR RFPS REMOVAL
ACCESSORY
MOUNTING
SURFACE
MIN CLEARANCE
REQUIRED FOR
RF MODULE
REMOVAL
17.8 mm
[.70 in.]
111.8 mm
[4.40 in.]
647 mm…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

System Description
1 - 13
Figure 1-6. J-3 Series Dimensions (including clearance)
17.8 mm
[.70 in.]
111.8 mm
[4.40 in.]
635 mm
[25.0 in.]
MIN CLEARANCE
REQUIRED FOR
RF MODULE
REMOVAL
198.1 mm
[7.80 in.]
OUTPUT
APERTURE…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions