Search Results

25 - 36 of 134 Products for 'C Mount' Page 3 of 12 |

C Mount

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-12. J-2 System Installation in OEM Equipment
A
A
796.51 mm
[31.359 in.]
770.51 mm
[30.335 in.]
14.00 mm
[.551 in.]
26.0 mm
[1.03 in.]
OUTPUT BEAM C
L
…

Related Products: Diamond Manual | J-2 | Red Pointer | Rectangular Aperture

SingleEmitters-780-830nm-Data-Sheet.pdf

SingleEmitters-780-830nm-Data-Sheet.pdf

Superior Reliability & Performance Single Emitter Diode Lasers, 780-830 nm Features: · Unique AAA epitaxial technology for highest reliability and lifetime · 7W from a 200 µm wide emitter · 5W from a 150 µm wide emitter · 3.2W from a 90 µm wide emitter · Lifetime >20,000 hours · ROHS compliant…

Related Products: 780 Nm Diode Laser | 808 Nm | 808 Nm Laser Diode

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

COHR PowerMax-Pro kW DS 0417 5 FINAL.pdf

PowerMax-Pro kW Sensors Datasheet
OPTIONAL ACCESSORIES
QBH-Mount Front Plate (for use with free space models)
78.61 mm
(3.1 in.)
38.4 mm
(1.51 in.)
98.55 mm (3.88 in.)
49.28 mm
(1.94 in.)
Ø 24.64 mm (0.97 in.) THRU
1.000-32 UNS-2B Thread
…

Related Products: 8 Kw | Gaussian Beam

00 E-250 Pre.book

00 E-250 Pre.book

…x 35 mm mounting bolts be torqued to 20 N·m
(177 in.-lb).
NOTICE!
Torque specification for the M8 X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-11. E-250 System Installation in OEM Equipment
(Dimensions in mm [inches])
C
1030.03…

Related Products: C Series User Manual | Interlock Fault | Maintenance And Troubleshooting | K 250

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…M8 x 35 mm mounting bolts be torqued to 20 N·m
(177 in.-lb).
NOTICE!
Torque specification for the M8 X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-12. J-3 System Installation in OEM Equipment
(Dimensions in mm [inches])
C
1030.03…

Related Products: Co2 Laser Tube | Chiller Filter | Rf Co2 Laser Tube | J3

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf

…filter in the BeamMaster InGaAs head configurations.
BeamMaster Accessories
An optional mount is available to enable rotation of the
BeamMaster sensor head about the optical axis.This mount
has a 360-degree calibrated scale with a locking screw. An
optional C-Mount Adapter…

Related Products: Powermax Pm10 | Pm1kx 100 | Cw Tunable | Talisker Ultra

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…mm mounting bolts be torqued to 20 N·m
(177 in.-lb).
NOTICE!
Torque specification for the M8 X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-12. J-5 System Installation in OEM Equipment
+0.025 mm [0.001 in.]
-0.000 mm [0.000 in.]
C…

Related Products: Red Pointer | J-5 Manual | Co2 Diamond J5 | Rectangular Aperture

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…M8 x 35 mm mounting bolts be torqued to 20 N·m
(177 in.-lb).
NOTICE!
Torque specification for the M8 X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-12. J-3 System Installation in OEM Equipment
(Dimensions in mm [inches])
C
1030.03…

Related Products: J3 Laser | Declaration Of Conformity | Rf Co2 Laser Tube

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…
that the M8 x 35 mm mounting bolts be torqued to 20 N·m
(177 in.-lb).
NOTICE!
Torque specification for the M8 X 35 mm mounting bolts is
20 N·m (177 in.-lb). Do not over torque.
Figure 3-11. J-3 System Installation in OEM Equipment
C
1030.03 mm
[40.553…

Related Products: J3 Laser

LaserCam-HR II User Manual

LaserCam-HR II User Manual

Description
2 - 1
SECTION TWO: DESCRIPTION
The LaserCam-HR II beam diagnostics cameras use laser-grade
1/2-inch and 2/3-inch CCD sensors for detection and analysis of
laser beam profiles from ~150 micron to 4 mm in diameter (1/2-inch
camera) and ~150 micron to 6 mm in…

Related Products: Lasercam Hr | Beamview User Manual | Beamview Software | Lasercam-hr Ii

Laser Focus World - January 2018

Laser Focus World - January 2018

…in a lab mount with no obvious cooling mechanism in sight). Laser diodes (LDs) are a special case: their small size means that even low-power emitters require a well-thought-out cooling configuration. All LDs have the active emitting semiconductor chip mounted on a heat-conductive mount, usually…

Related Products: Diode Laser Soldering | John | Laser Chiller | Laser Diode Bar

115-80029Laser-application-note-freespace-module revC.pdf

115-80029Laser-application-note-freespace-module revC.pdf

…in figure 3a. below has a diameter of 25.4mm (1 inch).
An adapter with SM1 threading (Thorlabs SM1P1) can secure the round module with two
set screws. The mount has external SM1 threads (figure 3b).
(a) (b)
(c)
Fig. 3 Free space module secured in a threaded adapter

Related Products: