Search Results

1 - 12 of 14 Products for 'C Series User Manual' Page 1 of 2 |

C Series User Manual

00 E-250 Pre.book

00 E-250 Pre.book

DIAMOND E-250 Series OEM Lasers Operator's Manual
2 - 4
Electrical Safety All E-250 Series laser systems, which consist of the laser head and
the RF power module, require high current + 48 VDC to operate.
This voltage is supplied by a commercial power supplies available
from…

Materials Processing & Industrial Applications

Materials Processing & Industrial Applications

manual grinding – scarfing the damaged area and refilling it with repair plys. The grinding process is preferred over the bolting process because it offers higher strength and reliability of the repair. Unfortunately the manual process involved in grinding is not repeatable and it requires high user

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…holes.
The laser is mounted to the user's system using 3 x M8 x 35 mm
steel bolts and 2 x M6 18 mm steel dowel pins. The location and
specification for the tapped and dowel pin holes necessary to mount
the laser system into the user's system is provided in Figure 3-12.
The…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…holes.
The laser is mounted to the user's system using 3 x M8 x 35 mm
steel bolts and 2 x M6 18 mm steel dowel pins. The location and
specification for the tapped and dowel pin holes necessary to mount
the laser system into the user's system is provided in Figure 3-12.
The…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…holes.
The laser is mounted to the user's system using 3 x M8 x 35 mm
steel bolts and 2 x M6 18 mm steel dowel pins. The location and
specification for the tapped and dowel pin holes necessary to mount
the laser system into the user's system is provided in Figure 3-12.
The…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-3-5 Series OEM Lasers Preinstallation Manual
3 - 28
Mounting Laser
System
Components
The integrated laser system has provisions for stress free mounting
that includes mounting features facilitating laser replacement. Since
the laser is aligned to these…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…holes.
The laser is mounted to the user's system using 3 x M8 x 35 mm
steel bolts and 2 x M6 18 mm steel dowel pins. The location and
specification for the tapped and dowel pin holes necessary to mount
the laser system into the user's system is provided in Figure 3-12.
The…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…holes.
The laser is mounted to the user's system using 3 x M8 x 35 mm
steel bolts and 2 x M6 18 mm steel dowel pins. The location and
specification for the tapped and dowel pin holes necessary to mount
the laser system into the user's system is provided in Figure 3-12.
The…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Operator's Manual Preliminary: December 18, 2015 1:00
1 - 4
Electrical Safety All J-5V Series laser systems, which consist of the laser head and the
RF power module, require high current at + 48 VDC to operate. This
voltage is sourced from…

COHR Genesis CX SLM-Series DS 1117 2.pdf

COHR Genesis CX SLM-Series DS 1117 2.pdf

…Deep
(0.188 Dia. Thru
C'Bore 0.312 in. Dia.
X 0.19 in. Deep)
(6X)
137.26 mm
(5.4 in.)
Power On Indicator
Manual Shutter
11.94 mm
(0.47 in.)
Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep
(0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep
6.38…

COHR Genesis CX STM-Series DS 0317 1.pdf

COHR Genesis CX STM-Series DS 0317 1.pdf


ISO 9001 Registered
Genesis CX STM-Series Datasheet
MECHANICAL SPECIFICATIONS
Genesis CX STM-Series
OEM and End User
19.38 mm
(0.76 in.)
80 mm
(3.15 in.)
144.93 mm
(5.71 in.)
156.06 mm
(6.14 in.)
5.56 mm
(0.22…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual
80
096|004|002|020|021|020|019|008 -LASER node reports temp
fault, Thermistor 5 at 8°C
395521178000 -15:37:27, FPGA reports
+24 Disabled
032|000|000|005|105|244|000|048
065|000|000|241|000|022|001|048 -RF…

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions