Search Results

1 - 12 of 17 Products for 'Carbide' Page 1 of 2 |

Carbide

Tinsley Custom Optics

Tinsley Custom Optics

…Fabrication Coherent also provides mirrors, lenses, etc.; and optical materials ranging from metals (aluminum, beryllium, and nickel) and silicon carbide to standard optical glasses, low expansion glasses and infrared crystals (CaF2, ZnSe, ZnS, Silicon, and Germanium) for precise aspheric, flat, and…

COHR Whitepaper PLD Excimer 2018 10 English.pdf

COHR Whitepaper PLD Excimer 2018 10 English.pdf

…steel substrates was not sufficient for some applications,
intermediate layers were employed. Best adherence was obtained with boron carbide and tungsten carbide
(WC) intermediate layers, which are also deposited by excimer laser ablation immediately prior to the ta-C
deposition. The…

Conflict Minerals Report 2017 Calendar Year End.pdf

Conflict Minerals Report 2017 Calendar Year End.pdf

…Metals Co. Ltd China
Tantalum XinXing HaoRong Electronic
Material Co., Ltd.
China
Tantalum Yichun Jin Yang Rare Metal Co.,
Ltd.
China
Tantalum Zhuzhou Cemented Carbide China
Tantalum NPM Silmet AS Estonia
Tantalum H.C. Starck Hermsdorf GmbH Germany

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

Microsoft Word - Coherent Whitepaper - Laser Processing of µLED

…commercial LED
production. Instead, GaN layers are heteroepitaxially grown on dissimilar substrate materials
such as sapphire, silicon carbide (SiC) or silicon. The vast majority of LED production today
utilizes sapphire wafer as the growth substrate for the MOCVD due to its small…

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

Coherent-new-lasers-improve-glass-cutting-methods wp.pdf

…The traditional mechanical technique for cutting glass involves scribing the surface of the glass with a hard, sharp tool (typically a diamond or carbide wheel), followed by a mechanical snapping force such as a "chopper bar." The well-known drawbacks include microcracking and chipping of the edges,…

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

…cutting glass, used in various forms for centuries, involves scribing the surface of the glass with a hard, sharp tool (typically a diamond or carbide wheel), followed by the application of mechanical stress to propagate the crack completely through the glass. In automated systems, this separation…

Industrial Laser Solutions - March/April 2016

Industrial Laser Solutions - March/April 2016

…parts. While traditional arc welding and laser-based methods are economically viable processes that deliver excellent results, there is a risk of carbide grain formation during the cladding process, which can compromise the mechanical strength and lifetime of the cladding. This article reviews a new…

Europhotonics - Winter 2015

Europhotonics - Winter 2015

…is used to deposit a 1.5-mm
thick layer of Laser LC 8 alloy -- a
steel alloy containing nickel and a high
content of tungsten carbide -- around
the entire roller circumference. Long
sections of pipe are clad, and the end
user is able to cut it to length as needed.…

Industrial Photonics - October 2014

Industrial Photonics - October 2014

…prepare the sharp edges of machine tool bits (e.g.,
drills and cutting bits for lathes and milling machines)
consisting of a tungsten carbide substrate with embedded diamond granules. These diamond granules typically
range from just a micron or two, up to tens of microns
in size.…

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

…glass, in use in various forms literally for centuries, involves scribing the surface of the glass with a hard, sharp tool (typically a diamond or carbide wheel), followed by a mechanical snapping force to propagate the crack completely through the glass. In automated systems, this separation is…

IndustrialUltrafast Whitepaper.pdf

IndustrialUltrafast Whitepaper.pdf

…which helps the manufacturer to maintain their
brand image of high quality and superior styling.
Micro-structuring Metals, Tungsten Carbide
and Diamond
Ultrafast lasers are being used increasingly to perform
micro-structuring in the automotive industry. One
technique…

IndPhotonics Micromachining Glass Cutting.pdf

IndPhotonics Micromachining Glass Cutting.pdf

…The picosecond laser produced a cleaner hole with less recast material and a smaller heat-affected zone (HAZ). Results of stealth dicing a silicon carbide wafer with a picosecond laser, before mechanical separation of the individual dies. Cross sections of glass cut with a nanosecond laser (top) and…