Search Results

Refine
1 - 12 of 55 Products for 'Ce Marking' Page 1 of 5 |

Ce Marking

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…Compliance
to Standards
Relevant to
CE Mark
The J-3-5 Series of lasers are OEM products, and are sold as components for integration into complete laser systems by a system integrator. These products are tested and CE Marked as independent
products. For specific details…

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

Astrella Ultrafast Amplifier Laser System Preinstallation Manual

…Compliance
(EMC) are specified in the EMC Directive (published in
89/336/EEC).
Conformance to the EMC requirements is achieved through compliance with the harmonized standard EN61326-1.
Compliance of this laser with the EMC requirements is certified by
the CE mark.

00 Legend Elite Preinstallation.book

00 Legend Elite Preinstallation.book

…Compliance
(EMC) are specified in the EMC Directive (published in
89/336/EEC).
Conformance to the EMC requirements is achieved through compliance with the harmonized standard EN61326-1.
Compliance of this laser with the EMC requirements is certified by
the CE mark.

Genesis-MX-Series-607-639-MTM-End-User

Genesis-MX-Series-607-639-MTM-End-User

…Consumption (W) 500
Ambient Temperature (°C)
Operating 10 to 40
Non-Operating -10 to 60
Relative Humidity6 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head7 296 x 49 x 71 mm (11.64 x 1.91 x 2.76 in.)
Cables (laser head to…

00 E-250 Pre.book

00 E-250 Pre.book

…per ANSI C63.4.
Compliance
to Standards
Relevant to
CE Mark
E-250 Series units are components and thus, the system integrator is
responsible for meeting the applicable standards for CE mark. As
part of the testing program, the E-250 Series lasers have been shown…

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

Preinstallation Manual Astrella Ultrafast Amplifier Laser System

…Compliance
(EMC) are specified in the EMC Directive (published in
89/336/EEC).
Conformance to the EMC requirements is achieved through compliance with the harmonized standard EN61326-1.
Compliance of this laser with the EMC requirements is certified by
the CE mark.

Automatic Tube Marking Laser System

Automatic Tube Marking Laser System

…certification and CE certification for maximum operator safety. Datasheet AutoTube Marker Precision laser marking for medical components - The Automatic Tube Marking System is an ideal solution for fully unattended, cost-effective production of laser marks on small tubes; the marks include UDI, Data…

Ion Lasers

Ion Lasers

--> The High-Power Ion Laser Leader since 1969. Noble gas ion lasers are among most mature of all laser technologies. Coherent has been in the high-power ion laser business from the very dawn of the laser industry. With technological maturity comes performance and reliability that was unheard of…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…this laser with the Electromagnetic Compatibility
(EMC) requirements is certified by the CE mark. For more
information about the CE mark see "Compliance to Standards
Relevant to CE Mark" on page 1-7.
RoHS Compliance The RoHS directive restricts the use of certain hazardous…

book.book

book.book

…Governmental
and Industrial Hygienists (ACGIH)
www.acgih.org
Laser Safety Guide
Laser Institute of America
www.lia.org
CE Marking
The European Community requirements for product safety are specified in the
Low-Voltage Directive (LVD) (published in 2014/35/EU).…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…Compliance
to Standards
Relevant to
CE Mark
The J-2 Series of lasers are OEM products, and are sold as
components for integration into complete laser systems by a system
integrator. These products are tested and CE Marked as independent
products. For specific…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…Compliance
to Standards
Relevant to
CE Mark
The J-3 Series of lasers are OEM products, and are sold as components for integration into complete laser systems by a system integrator. These products are tested and CE Marked as independent
products. For specific details…