Search Results

Refine

Result Type

13 - 24 of 24 Products for 'Chiller Coolant' Page 2 of 2 |

Chiller Coolant

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book

…system is 95°F
(35°C).
Install the filter, then connect:
· Outlet of chiller to input of LMT
· Inlet of chiller to output of LMT
Coolant
Composition
The recommended coolant composition is a mixture of water and
OPTISHIELD®, a low-toxicity corrosion inhibitor…

PaladinAdvanced355 Datasheet 2017.pdf

PaladinAdvanced355 Datasheet 2017.pdf

…in., rack-mountable
Pump Fiber's Length 5m (16.4 ft.)
Weights
Laser Head 50 kg (110 lbs.)
Power Supply (master & slave) 30 kg (66 lbs.)
Chiller (8W/10W) 38 kg + 3 liters coolant (84 lb. + 0.7 gal.)
Chiller (16W/24W) 42 kg + 3 liters coolant (92 lb. + 0.7 gal.)

PaladinAdvanced355 DS

PaladinAdvanced355 DS

…in.), 19 in., rack-mountable
Chiller 482 x 177 x 560 mm (19 x 7 x 22 in.), 19 in., rack-mountable
Pump Fiber's Length 5m (16.4 ft.)
Weights
Laser Head 50 kg (110 lbs.)
Power Supply 30 kg (66 lbs.)
Chiller 38 kg + 3 liters coolant (84 lb. + 0.7 gal.)
Utility and…

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

…200 for 6 ms
COOLANT
Heat Load (kW) 4.8
Dynamic Coolant Flow Rate (l/min.) 5.7
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant9 Anti-corrosion treated water
Coolant Differential Pressure10…

COHR DIAMOND E-1000 DS 0817 1.pdf

COHR DIAMOND E-1000 DS 0817 1.pdf

…to 1 ms
COOLANT
Heat Load (kW) <22
Dynamic Coolant Flow Rate (l/min.) >25 (6.5 gpm)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant8 Anti-corrosion treated water
Coolant Differential…

COHR DiamondJ-2 DS 0518 2.pdf

COHR DiamondJ-2 DS 0518 2.pdf

…120 for 6 ms
COOLANT
Heat Load (kW) 2.5
Dynamic Coolant Flow Rate (l/min.) 5.7
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant9 Anti-corrosion treated water
Coolant Differential Pressure10…

COHR DIAMOND J-3 DS 0617 1.pdf

COHR DIAMOND J-3 DS 0617 1.pdf

…200 for 6 ms
COOLANT
Heat Load (kW) 4.5
Dynamic Coolant Flow Rate (l/min.) 5.7
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant9 Anti-corrosion treated water
Coolant Differential Pressure10…

COHR DIAMOND J-5 DS 1117 1.pdf

COHR DIAMOND J-5 DS 1117 1.pdf

…(A) 380 for 6 ms
COOLANT
Heat Load (kW) 9
Dynamic Coolant Flow Rate (l/min.) 9.5
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant9 Anti-corrosion treated water
Coolant Differential Pressure10…

COHR DIAMOND E-1000 DS 1118 1.pdf

COHR DIAMOND E-1000 DS 1118 1.pdf

…to 1 ms
COOLANT
Heat Load (kW) <22
Dynamic Coolant Flow Rate (l/min.) >25 (6.5 gpm)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant8 Anti-corrosion treated water
Coolant Differential…

COHR DiamondJ-5 DS 0119 1.pdf

COHR DiamondJ-5 DS 0119 1.pdf

…(A) 380 for 6 ms
COOLANT
Heat Load (kW) 9
Dynamic Coolant Flow Rate (l/min.) 9.5
Coolant Setpoint Temperature Range 21 to 25°C (69.8 to 77°F)
Coolant Temperature Stability (max.) ±1.0°C (±1.8°F)
Coolant9 Anti-corrosion treated water
Coolant Differential Pressure10…

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

…the water and keep it from soaking into the coating. Coolant Tap or distilled water is recommended. The exact temperature of the water is not critical as long as the temperature is relatively stable. The water can be supplied from a chiller or local tap. Do not use DI water, as it will dissolve…

Microsoft Word - QI-19.140 revAC.docx

Microsoft Word - QI-19.140 revAC.docx

QI-19.140 Rev. A Flow Re A Cohere Caution While wor Water will water doe water is to into the co Coolant Tap The rela Do Eth Allo wa me Ma mu sho rate It is sup will flow to a sys Fitting an The follow water flow using thes threshold or contact density sp the fittings other that void the w AC…