Search Results

Refine

Result Type

1 - 12 of 19 Products for 'Chiller Filter' Page 1 of 2 |

Chiller Filter

00 E-1000 PreInst.book

00 E-1000 PreInst.book


Coolant Filtering To prevent accumulation of debris in the cooling system, the coolant
should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than
30 µm in diameter, unless specified by the chiller manufacturer…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…Crate for Chiller 1048245
Paladin Operator's Manual 1046834
Accessory Kit 1052676
PALADIN 355 CHILLER (SWITCHABLE) 1167280
Paladin 355 Chiller NA
Shipping Crate for Chiller Paladin 355 1048245
Manual Coherent Chiller 1037667
Replacement Filter for Chiller 1037668…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book


Coolant Filtering To prevent accumulation of debris in the cooling system, the coolant
should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than
30 µm in diameter. However, if the chiller manufacturer…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…1153866
Paladin Laser Chiller for Remote Temperature Sensor for Paladin 8W/10W 1114080
Laser Chiller for Remote Temperature Sensor and Remote Set Temperature P307 1151418
Shipping Crate for Chiller Paladin 355 1048245
Replacement Filter for Chiller 1037668
Corrosion…

00 E-250 Pre.book

00 E-250 Pre.book

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…minimize the pressure drop from the chiller to the laser
system. Do not exceed the maximum hose length specified by the
chiller manufacturer.
A suitable water filter should be connected as shown in Figure 3-1
on the input water line from the chiller.
Shut-off valves on the…

00 LMT Pre.book

00 LMT Pre.book

chiller. Cut the tubing in half.
The included filter is installed in-line before the input to the LMC.
Also included are two ½" (12.7mm) chiller outlet fittings with ¾"
NPT threads.
Install the filter, then connect:
· Outlet of chiller to input of LMC
· Inlet of chiller

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions