Search Results

1 - 12 of 126 Products for 'Circuit' Page 1 of 11 |

Circuit

LAMBDA SX Excimer Laser Series

LAMBDA SX Excimer Laser Series

…LAMBDA SX E500 500 1000 500 Datasheet LAMBDA SX Applications Application Process Material Ink-Jet Nozzle Drilling 3D-Structuring Roll-To-Roll Circuit Patterning Pulsed Laser Deposition Automotive Cylinder Hardening Excimer Laser Annealing Sequential Lateral Solidification Ablation-Material Removal…

Excimer laser technology trends

Excimer laser technology trends

…power achieved over the last two decades are the
combined results of technological advances in laser discharge
preionization, discharge circuit design as well as laser gas
cooling, ventilation and cleaning.
The technique to produce and control a homogeneous
gas discharge is…

Photonics Spectra - August 2018

Photonics Spectra - August 2018


Laser Trapping
Tech Feature
Figure 2. Mephisto amplitude noise, expressed as RIN (relative intensity noise). The noise eater circuit is
effective in eliminating most of the pump-diode current noise and also the noise peak (at 0.7 MHz) caused by
relaxation oscillations.…

The Select | Fully Integrated Manual Welding Laser

The Select | Fully Integrated Manual Welding Laser

…open
* Large working chamber accessed by manual ports with leather cuffs
* Flow-controlled exhaust system with HEPA filter
* Closed-loop cooling circuit for 24/7 operation
* Generously dimensioned linear axes and additional rotary axis
* Ready to use after delivery Datasheet Select Manual welding…

Pulse Switch for Mira 900

Pulse Switch for Mira 900

…(TTL)
* Digital and analog phase adjust of RF pulse (360°)
* Electronic delay
* Synchronization and RF pulse monitor outputs
* RF overload safety circuit Datasheet Pulse Switch for Mira 900 Drawing Pulse Switch for Mira 900 Cavity Dumper Accessory - With Pulse Switch, the Mira cavity is extended to…

MATRIX Family of Q-Switch Lasers

MATRIX Family of Q-Switch Lasers

…no chemicals required: - Disposal reduction
* Processing of hard, thin, and deformable materials (e.g. ceramics and sapphire substrates, flexible circuit boards, etc.)
* Process and material flexibility
* Excellent reproducibility and quality
* Complete computer control of the machining process and…

Miniature Diode Laser Modules

Miniature Diode Laser Modules

…manage the constant power laser drive with a closed-light loop based on an internal photodiode. Also included in the electronics are protection circuits to provide a robust system in even the smallest of packages. Miniature diode laser modules use the patented AlignLock technology to guarantee…

DIAMOND E-Series

DIAMOND E-Series

…Application Process Material Advanced Packaging and Interconnects Materials Processing Graphic Arts Cutting Drilling Printing Scribing Flex Circuit Die Board Metal Plastic Flat Panel Display Paper Foil Wood and Derivatives --> Liquid-Cooled, RF-Excited OEM Industrial CO2 Laser - DIAMOND E-1000…

LEAP Excimer Lasers

LEAP Excimer Lasers

…Datasheet LEAP Excimer Laser Applications Application Process Material 3D-Structuring Etch Barrier Patterning Ink-Jet Nozzle Drilling Roll-To-Roll Circuit Patterning Diamond Like Carbon Coating Pulsed Laser Deposition Ablation-Material Removal Ceramic Polymer Glass Semiconductor Plastic Metal…

DIAMOND J-3-5 CO Laser - 5µm

DIAMOND J-3-5 CO Laser - 5µm

…absorption at 5 µm in certain plastic films, polymers and water, as well as some of the dielectric materials and copper oxides used in printed circuit boards (PCBs). This will therefore enable higher efficiency processing of these materials. Conversely, there is very low absorption at 5 µm in…

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

J-Power Pro Energy Sensor DB-25-to-BNC Adapter

…Adapter DB-25-to-BNC Adapter Compact sensor adapter to power the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors. The J-Power Pro is a compact sensor adapter that powers the active sensor circuit in DB-25 EnergyMax and PowerMax-Pro sensors and passes the raw output voltage of…

MATRIX CW Lasers

MATRIX CW Lasers

…piece - Reduced danger of work piece damage - No tool wear - Processing of hard, thin and deformable materials (e.g., ceramics, sapphire, flexible circuit boards, etc.)
* Complete computer control of the machining process (CIM capability, Just-in-Time manufacturing) with respect to the scientific…