Search Results

1 - 12 of 15 Products for 'Cleaning Mirrors' Page 1 of 2 |

Cleaning Mirrors

PM-Pro Cleaning Guide Sep2014.pdf

PM-Pro Cleaning Guide Sep2014.pdf

…optical cleaning techniques used with lenses, mirrors, or fibers. Familiarity with other optical cleaning procedures can be beneficial when dealing with the PowerMax-Pro sensors. To start with, it is recommended that any sensor cleaning be done in a relatively clean environment using clean tools to…

DIAMOND C-70 Air-Cooled Laser Preinstallation Manual, Rev. AD

DIAMOND C-70 Air-Cooled Laser Preinstallation Manual, Rev. AD

…external
optical realignment. This external alignment would be a
repositioning of the head itself or adjustment of beam delivery
mirrors (positions and angle). Consult Coherent if there is any
question about such interchangeability issues. Consult Coherent if
there is any…

Untitled-2

Untitled-2


2). Plus, green USP laser processing creates a reduced
amount of microscopic debris that is easily eliminated by
cost-effective cleaning methods.
Why green? Like traditional nanosecond lasers, the
newer USP lasers are available with output in the infrared,
green and…

DIAMOND C-20 and C-30 Air-Cooled OEM Lasers Preinstallation Manual, Rev. AE

DIAMOND C-20 and C-30 Air-Cooled OEM Lasers Preinstallation Manual, Rev. AE

…require
external optical realignment. This external alignment would be a
repositioning of the head itself or adjustment of beam delivery mirrors
(positions and angle). Consult Coherent if there is any question about
such interchangeability issues.
Coherent recommends use of…

DIAMOND C-30+ Air-Cooled OEM Laser Preinstallation Manual, Rev. AA

DIAMOND C-30+ Air-Cooled OEM Laser Preinstallation Manual, Rev. AA

…external
optical realignment. This external alignment would be a
repositioning of the head itself or adjustment of beam delivery
mirrors (positions and angle). Consult Coherent if there are any
questions about such interchangeability issues.
Coherent recommends use of the…

DIAMOND C-40 Air-Cooled Laser Preinstallation Manual, Rev. AC

DIAMOND C-40 Air-Cooled Laser Preinstallation Manual, Rev. AC

…external optical
realignment. This external alignment would be a repositioning of the
head itself or adjustment of beam delivery mirrors (positions and
angle). Consult Coherent if there is any question about such interchangeability issues.
Coherent recommends using optional…

DIAMOND C-60+ Series OEM Lasers Preinstallation Manual, Rev. AA

…require
external optical realignment. This external alignment would be a
repositioning of the head itself or adjustment of beam delivery mirrors
(positions and angle). Consult Coherent if there are any questions about
such interchangeability issues.
Coherent recommends use…

CMM 10.4.indd

CMM 10.4.indd

…headroom for flexible OLED cutting. Additionally,
the laser must produce a high quality, Gaussian
beam in order to yield a sharp and clean cut,
as well as exhibit industrial-grade stability and
reliability to maintain the expected yield over 24/7
operation.
Practical…

Coherent Optoskand Brochure 10-20-17.pdf

Coherent Optoskand Brochure 10-20-17.pdf


Laser safety is fundamental for all Optoskand incoupling
optics. The integrated electronics monitor fiber breakage,
cabinet doors, mirror positions, etc. The DGUV-certified
safety electronics makes it easier to integrate our
components in industries demanding a high safety…

Coherent Whitepaper 3D Marking.pdf

Coherent Whitepaper 3D Marking.pdf

…requirement is that the marking process not adversely affect surrounding (unmarked) material, and that minimal or no post processing (e.g. cleaning) be required. Laser marking can satisfy all these requirements, typically much more readily than alternative marking methods, such as ink printing.…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…specifications: wavelength, beam diameter, power
density, divergence, output beam height (with respect to base-plate
or mounting ball), mirror cooling, etc.
Shutter If the laser is equipped with the optional internal shutter assembly, a
red (visible) aiming laser is provided…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…specifications: wavelength, beam diameter, power
density, divergence, output beam height (with respect to base-plate
or mounting ball), mirror cooling, etc.
Shutter If the laser is equipped with the optional internal shutter assembly, a
red (visible) aiming laser is provided…