…BENEFITS · Unique pulse width, unique material interaction · 1064 nm or 532 nm · Integrated laser positioning help · Air cooled laser · Compact size · Low operating costs APPLICATIONS · Plastic Marking · Shallow Marking · Thin Film Ablation · Removal of Plastic Coatings · Wafer Backside Marking
…1064 nm or 532 nm · Integrated laser positioning help · External modulator for ultra-precise pulse control · Water/Air-cooled laser · Low operating costs APPLICATIONS · Plastic Marking · Plastic Foil/Tape Cutting · Thin Film Ablation · Removal of Plastic Coatings · Laser Scribing · Surface Cleaning
…applications rely on infrared
and visible Q-switched lasers, which have
pulse widths in the tens of nanoseconds
range, and which remove material via a
photothermal interaction. Here, the focused
laser beam acts as a spatially confined, intense
heat source. Targeted…
mold release agent. The SEM photos (FIGURE 3) demonstrate the technique's ability for highly controlled
bond and matrix material removal
without damage to the exposed fbers.
After laser cleaning, specimens
were bonded, and bond strength was
…laser marked products, this
HAZ doesn't represent a significant problem.
With a picosecond laser, the laser processed material is
removed in such a short timeframe that the vaporized
material carries away any heat before it can spread.
However, in some applications, even a…
Fiber-laser-based machine vision solutions offer versatility and improved line resolutions for industrial uses.
This is a prototype demonstration of a machine-vision-controlled laser-based selective coating removal
Southwest Research Institute
…Material 3D-Structuring Etch Barrier Patterning Ink-Jet Nozzle Drilling Roll-To-Roll Circuit Patterning Diamond Like Carbon Coating Pulsed Laser Deposition Ablation-Material Removal Ceramic Polymer Glass Semiconductor Plastic Metal Composite --> Features & Benefits LEAP Features & Benefits…
…PMMA. The homogenized excimer beam is passed through a photomask, which is then re-imaged on this coated substrate. The high energy UV photons interact with the metal/substrate interface, directly removing the thin metal film in a pattern defined by the mask image. With a metal film thickness of 40…
…quality makes the HighLight FL1000P an ideal laser source for ablation, surface cleaning, and precision material and coating removal in a range of applications. These include AlSi removal from tailored blanks prior to welding, edge deletion for thin film (a-Si, CdTe, CIGS) solar cells, cleaning of…
…only after non-contact methods have failed. Some optics
have a special anti-reflective coating. Using a cleanser (such as isopropyl alcohol)
to remove contamination can damage this coating and the optical lens assemblies.
If your laser generates a pattern requiring…
…Optic Window Removal
8. At this point you should put on gloves or at the very least a glove on your left hand. The optic window should
never be handled with bare fingers. The most important point to remember is that the optic window has a very
delicate coating that must be protected.…
…relatively high material removal rates; however, for the
most demanding tasks, peripheral heat affected zone (HAZ) damage can be a significant problem.
For multilayer targets such as OLED's, this undesirable damage can lead to delamination of
surface coatings, microcracking, changes…