Search Results

25 - 36 of 82 Products for 'Collimated Diode Laser' Page 3 of 7 |

Collimated Diode Laser

Book.book

Book.book

laser system is a direct-emitting semiconductor laser.
The output beam of the diode is collimated by a high-aperture lens.
Additionally, the beam is formed by a prism pair to achieve a round
beam in the far field. A thermoelectric cooler is integrated for stabilizing the diode laser.

Mode Master White Paper July 2011 final.pdf

Mode Master White Paper July 2011 final.pdf

…infrared,
CW and quasi-CW lasers. Typical examples of these
are gas lasers (e.g. HeNe's, ion lasers and HeCd's),
collimated diode lasers, optically pumped
semiconductor lasers (OPSLs), collimated fiber lasers,
and mode locked solid-state lasers.
Applications

Mode-Master-Whitepaper FORMFIRST.pdf

Mode-Master-Whitepaper FORMFIRST.pdf

…infrared,
CW and quasi-CW lasers. Typical examples of these
are gas lasers (e.g. HeNe's, ion lasers and HeCd's),
collimated diode lasers, optically pumped
semiconductor lasers (OPSLs), collimated fiber lasers,
and mode locked solid-state lasers.
Applications

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

Self-Aligned Non-Dispersive External Cavity Tunable Laser.pdf

…Fig.2(c) left shows a picture of a TO-can 5.6
mm laser diode with a 1 by 2 m emission facet area and with a mirror mounted adjacent the
emission facet. Fig.2(c) right shows the TO-can laser diode mounted in a tube holding a
collimating lens inside and with the VHG mounted on top. The…

Sample manuscript showing specifications and style

Sample manuscript showing specifications and style

…Fig.2(c) left shows a picture of a TO-can 5.6 mm laser diode with a 1 by 2 m emission
facet area and with a mirror mounted adjacent the emission facet. Fig.2(c) right shows the TO-can laser diode mounted
in a tube holding a collimating lens inside and with the VHG mounted on top. The…

book.book

book.book

…in the direction shown in Figure 2-41
moves the collimating lens closer to the laser diode.
Figure 2-39. Place Photo-Diode Sensor
Figure 2-40. Sensor Placement for Divergent Beam
Figure 2-41. Adjust the Collimating Lens
Connector Ferrule
SMA Connector
Photodiode…

Microsoft Word - ECL pw2009.doc

Microsoft Word - ECL pw2009.doc

…in fig. 2., is applicable to single broad area laser diode or an array of broad
area laser diodes. This architecture is an extension of the cavity proposed by the authors for single frequency tunable
lasers [4].
HR
coating
Laser array
emission
Heat
sink

COHR CompactSE DS 0919 Final.pdf

COHR CompactSE DS 0919 Final.pdf

…ACCESSORIES
COLLIMATORS FIXED OPTICS FIXED OPTICS
WITH INTEGRATED
PYROMETER
SCANNER OPTICS
The collimator is optimized to the
requirements of Compact Series
diode laser optical specifications: It
is available with different collimating
focal length…

COHR CompactEvolution DS 0619 FIN.pdf

COHR CompactEvolution DS 0619 FIN.pdf


AVAILABLE ACCESSORIES
COLLIMATORS FIXED OPTICS FIXED OPTICS WITH
INTEGRATED PYROMETER
The collimator is optimized to the requirements
of Compact Series diode laser optical
specifications: It is available with different
collimating focal length for SMA and QBH fiber…

COHR CompactEvolutionXL DS 0919 FIN.pdf

COHR CompactEvolutionXL DS 0919 FIN.pdf


AVAILABLE ACCESSORIES
COLLIMATORS FIXED OPTICS FIXED OPTICS WITH
INTEGRATED PYROMETER
The collimator is optimized to the requirements
of Compact Series diode laser optical
specifications: It is available with different
collimating focal length for SMA and QBH fiber…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…alignment
setscrews and 2) move the collimating lens closer or further
with the adjustment ring. (As a guideline, rotating the adjustment ring in the direction shown in the following photo will
move the collimating lens closer to the laser diode.)
· Typical coupling efficiencies…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

…50ºC.
Laser Safety
Shutter Module
with Diode Pointer
(Optional)
The optional laser safety shutter module with diode pointer has been
designed specifically for the J-3-5 Series lasers. It is integrated into
the optics compartment just before the output of the laser