Search Results

1 - 12 of 60 Products for 'Commands' Page 1 of 5 |

Commands

Book.book

Book.book

command or query entered.
Refer to the "?F" query--Table 5-4 (p. 5-5)--for a complete list
of values returned with the command prompt.
Coherent CUBE CW Commands

*Query only ?<query>

*
*Command
command=<value>

*
*
*Both
?H displays a list of the commands

book.book

book.book

Section Four: Install and Run Software
4 - 11
Commands Tab
Figure 4-20 shows the Commands tab. Enter commands or queries in the space near
the bottom of the window.
View commands sent to control the laser, as well as responses received from the laser,
in the center…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…repetitive commands sent to the Coherent
BioRay laser.
This only applies to commands and not queries.
Host Command
Quick
Reference
The following table gives a brief description of all host commands
and queries. For more information about a specific command or

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…This command selects the state of SCPI message round trip handshaking.
Command: SYSTem:COMMunicate:HANDshaking {ON|OFF}
Reply: OK if ON is selected; otherwise no reply is sent
Query: SYSTem:COMMunicate:HANDshaking?
Reply: ON|OFF
If handshaking is ON:
· Empty commands

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…rules defined under the SCPI Standard.
Commands and
Queries
SCPI Common
Commands
The SCPI Standard specifies a standard set of common commands.
All common commands and queries start with an asterisk.
Reset Command -
*RST
Resets all operational parameters…

00 E-1000 PreInst.book

00 E-1000 PreInst.book


5. Get Commands (available at any time)............................................................................. 72
6. Set Commands .................................................................................................................. 73
7. Special Commands (available…

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

Microsoft Word - 115-80040-001 Compact Laser Module Manual.doc

…is
not supported.
4.4.2 Command formatting and termination characters
Each command to the controller must be terminated by a carriage return/line feed pair (ASCII 13
followed by ASCII 10).
All commands are case-sensitive.
Command arguments must be delimited by a single…

Avia preinstall.book

Avia preinstall.book

…for the ThermEQ,
PulseEQ, and PulseTrack modes (MODE2) of operation.
Note that in ThermEQ, PulseEQ, and PulseTrack modes, this
command is redundant to the DT=nn command.
Valid range is 0 to 200 us.
Table 11. RS-232 Commands (Continued)
COMMANDS ACTION PERFORMED

ModeMaster PC User Manual

ModeMaster PC User Manual

…example displays this relationship:
File
The following subsections further describe the commands in the
order they appear on the File menu.
Delay Control for Profile Plot
COMMAND KEY ICON DESCRIPTION
Open Ctrl + O Access to view ModeMaster PC data files.
Save Ctrl…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Mechanical Specifications Weight (g) <70
Length (mm) 95
Diameter (mm) 19.05
Material Black annodized AL 6061 T1
Commands Description
CDRH Enables/Disables CDRH Delay
BAUD Set Baud Rate
HAND Enables/Disables SCPI Handshaking
HOUR Reports System Lasing Hours…

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf

WP-Meterless-Laser-Power-Energy-Measurement-Simplifies-Embedding.pdf


their own software, an extensive set of host interface
commands is available to control all aspects of meter
operation. Specifically, the supplied DLL driver
supports simple ASCII remote interfacing host
commands on both the USB and RS-232 connected
sensors. To further…

Miniaturization-Technology-Provides-Next-Generation-Laser-Power-Measurement FORMFIRST.pdf

Miniaturization-Technology-Provides-Next-Generation-Laser-Power-Measurement FORMFIRST.pdf


own software, an extensive set of host interface
commands is available to control all aspects of power
meter operation. Specifically, the supplied DLL driver
supports simple ASCII remote interfacing host
commands on both the PowerMax-USB and PowerMaxRS sensors. To further…