Search Results

25 - 36 of 43 Products for 'Continuous Co2 Laser' Page 3 of 4 |

Continuous Co2 Laser

Industrial Photonics - October 2017

Industrial Photonics - October 2017

…between the
two laser types. Specifically, the CO
2
laser produces mid-infrared output at a
wavelength of 10.6 µm. This is delivered
to the cutting head using free-space optics enclosed in articulated arms. These
tubular arms have to be continuously
purged to avoid…

UCLD Catalog.book

UCLD Catalog.book

…1-1
CO2
Diamond OEM Course ...................................................................................... 1-1
Continuous Wave.............................................................................................................…

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

…either laser or mechanical, is used to finish the break; this is called laser
scribing.
Figure 2. Schematic illustration of CO2 laser scribing.
The overall process is much the same with the CO laser. However, glass absorption of the 5 µm to 6
µm output of the CO laser is…

Industrial Photonics - January 2015

Industrial Photonics - January 2015

…parts after cutting, further reducing productivity and increasing waste. In contrast, the CO 2 laser is a noncontact tool that cuts essentially by melting and vaporizing material away. The CO 2 laser is preferred for plastics cutting because its infrared output is strongly absorbed by most organic…

Photonics Spectra - July 2014

Photonics Spectra - July 2014

…the need for improved process precision and ever-higher yields is making laser characterization even more critical. Measurement requirements For most laser processes, no matter what the operating regime - CW (continuous wave), millisecond, nanosecond or femtosecond - or output wavelength, average…

Microsoft Word - COHR HeavyMetalPipeCutting WP 0519

Microsoft Word - COHR HeavyMetalPipeCutting WP 0519

…two laser types. The CO2
laser
produces mid-infrared output at a wavelength of 10.6 m. This is delivered to the cutting head
using free space optics enclosed in articulated arms. These tubular arms have to be
continuously purged to avoid any damage to the mirrors. The fiber laser

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue


the CO vs. the CO2
lasers.
The CO2
and CO lasers are infrared sources
that process glass by causing intense, local
heating. Specifically, all types of glass absorb
strongly at the 10.6-µm CO2
laser wavelength,
so a focused laser beam causes rapid heating…

00 E-250 Pre.book

00 E-250 Pre.book


Introduction The DIAMONDTM E-250 Series laser systems (Figure 1-1 and
Figure 1-2) are integrated, RF excited, liquid-cooled, sealed-tube,
pulsed industrial CO2
lasers and consist of a single housing
incorporating the laser resonator and beam conditioning optics, RF

COHR MaterialsProcessingBrochure 0816revA 3.pdf

COHR MaterialsProcessingBrochure 0816revA 3.pdf

…and GEM-Series
CO2 lasers are rugged, highly efficient, continuous-wave OEM units
providing output powers up to 100W.Their ultra-compact air-cooled
or liquid-cooled design makes them the highest output power per
unit volume of any sealed CO2 laser available commercially.Their…

LabMax-Pro SSIM User Manual

LabMax-Pro SSIM User Manual

…best
used to measure the power of CW lasers or the average power of
high-repetition rate lasers.
High-Speed Mode High-speed mode operates at a continuous data sampling rate of
20 kHz, permitting pulse shape analysis of modulated lasers with
repetition rates up to 2.5 kHz.…

Coherent

Coherent

…risks, we believe that we are well positioned to continue to
capitalize on the current market trends and that we will see continued increased adoption of our solidstate, CO2
, fiber, direct diode and excimer lasers, as all these lasers enable entirely new applications,
performance…

Microsoft Word - Coherent Whitepaper - Marking Stainless Steel Medical Devices

Microsoft Word - Coherent Whitepaper - Marking Stainless Steel Medical Devices

Laser Marking
Laser marking is not a new idea - it has been used to produce various types of marks for
literally decades now in numerous industries. Carbon dioxide (CO2
) lasers, solid-state
nanosecond (called DPSS) lasers, and continuous-wave fiber lasers all continue to be used…