Search Results

Refine
1 - 12 of 42 Products for 'Cooler' Page 1 of 4 |

Cooler

00 Laser Cooling.book

00 Laser Cooling.book

…humidity range.
The conditions that lead to a situation where there can be condensation are warm and humid weather combined with water that is cooler
than the surroundings. High risk conditions which will lead to
condensation are:
· Operating the laser in a room that is not air…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…actively cooled, the expected
lifetime becomes >30,000 hours. Both the Radius
and CUBE systems offer an internal thermal-electric
cooler (TEC) drive for complete thermal management
and optimization of the diode laser's reliability
and performance.
All Coherent diode…

RQB Fiber Optic Cable

RQB Fiber Optic Cable

…(with external cooler) Max Peak power @1064nm 10 kW at 10 ms pulse length 50 kW at 1 ms pulse length 1 MW at 50 ns pulse length Transmission losses < 3%, typical 1% Power loss capability in the connector Max. 100 W for 10 s Max. 50 W for 1 min Max. 10 W continuously With external cooler: Max. 150 W…

Magnum II Laser

Magnum II Laser

…PRICE HERE High-Power Structured Light Pattern Generating Laser The Magnum II has fully protected electronics as well as a bipolar thermoelectric cooler used to keep the laser diode at a constant temperature. The laser beam can be modulated by an external signal and all models can operate in either…

Fiber Optic Cables

Fiber Optic Cables

…1.5/3.0 kW 20 kW 750W 300W Transmission losses < 3%, typical 1% Compatible interface LLK-Q HLC-8/LC-8 LLK-D LCA LLK-Auto Ø30 mm Ø14 mm
*External cooler available
*
*z-plane moved 25 mm The table above is for guidance only.< Call +1 800 527 3786 | Outside the U.S. +1 408 764 4983 Coherent has…

PowerMax-Pro 15mm OEM Sensors

PowerMax-Pro 15mm OEM Sensors

…deliver fast, accurate, and low noise measurements. Plus it eliminates the expense and complexity of the optical attenuators, preamps, and TE coolers often required with photodiodes. It is also well matched for nearly instantaneous power measurement of industrial ultrashort pulse lasers. Typical…

Book.book

Book.book

…Ounce inches
rms Root mean square (effective value of a sinusoidal wave)
RMA Return material authorization
TEC Thermo-electric cooler
TEM Transverse electromagnetic mode (cross-sectional laser beam mode)
TTL Transistor-transistor logic
UV Ultra violet
V Volt(s)…

SPIE DSS 2013 Final submitted 4-25-2013x

SPIE DSS 2013 Final submitted 4-25-2013x

…DPAL applications. As shown in Fig. 1, each diode bar is
mounted with indium solder to a micro-channel cooler heat sink [5].
Figure 1. Diode bar mounted on a micro-channel cooler with dimensions W x L x H of 11mm x 27mm x 1.8mm.
2.1 Laser bars at 780 nm for Rb laser pumping
Diode…

Laser Focus World - January 2018

Laser Focus World - January 2018

…LD. A high-power micro-impingement cooler combines impingement
heat transfer with
manifold microchannel designs--
MC2 says that offthe-shelf coolers
can reach thermal
resistances as low
as 25 K-cm2/kW,
with experimental
coolers reaching 18
K-cm2/kW.

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual


numbers will decrease quickly but, as the sensor cools, the
numbers decrease more slowly--the slower the decrease, the
cooler the sensor, and the cooler the sensor, the more accurate
the area correction reading will be. Optical sensors do not
require a cool-down period.

FieldMaxII-TOP User Manual

FieldMaxII-TOP User Manual


numbers will decrease quickly but, as the sensor cools, the
numbers decrease more slowly--the slower the decrease, the
cooler the sensor, and the cooler the sensor, the more accurate
the area correction reading will be. Optical sensors do not
require a cool-down period.

COHR MagnumII DS 1017 3.pdf

COHR MagnumII DS 1017 3.pdf

…the laser has exceptional beam pointing and focusing stability. The Magnum II has fully protected electronics as well as a bipolar thermoelectric cooler used to keep the laser diode at a constant temperature. The laser beam can be modulated by an external signal and all models can operate in either…