--> Fiber-to-Fiber Coupler Air-cooled The air-cooled Fiber-to-Fiber Coupler (FFC ac) accommodates input power up to 4.5 kW. Contact Us About This Product See Related Products Close PRICE HERE Tech Spec Max. Power (CW) 4.5 kW Magnification 0.6 / 1.0 / 1.2 Max. NA 0.09 / 0.18 / 0.18 Optics material…
--> Fiber-to-Fiber Coupler Water-cooled The Fiber to Fiber Coupler (FFC wc) connects a laser beam from one fiber optic cable to another. The FFC wc is an eye-safe stand-alone unit with one fiber input and one fiber output. The FFC wc is water-cooled to handle high power levels (up to 12 kW). The FFC…
…Optics Products Fiber-to-Fiber Coupler Air-cooled Fiber-to-Fiber Coupler Air-cooled The Fiber to Fiber Coupler air-cooled (FFC ac) has a power handling capacity of 4.5 kW. Fiber-to-Fiber Coupler Water-cooled Fiber-to-Fiber Coupler Water-cooled The Fiber to Fiber Coupler (FFC wc) connects a laser…
…long-radius output coupler acts as a weak lens to transfer the output-beam parameters. The values listed for beam divergence, beam waist diameter and beam waist location take into account the weak lens effect. The value for beam waist location is measured from the output coupler toward the high…
…parameter values are typical. 5Beam diameter measured at 1/e2 points, 1m from output bezel. 6 Beam diameter measured at 1/e2 points at the output coupler. 7Full-angle measurement. 8Performance in light regulation with PowerTrack™ over a 30-minute period following a one-hour warm-up. Innova 300C…
--> INNOVA 70C I-70C is an ion laser pared to its essential functionality. It is an entry-level device ideally suited for light industrial and scientific applications such as flow visualization, microscopy, and spectroscopy. I-70C features a compact laser head and an aluminum resonator for rapid…
other laser parameters can be found at www.coherent.com.
Figure 2-2. Verdi G-Series Laser Head Optical Schematic.
Saturable absorber aperture with
width and translation controls
X, Y and length control of
output coupler mirror M1
The inside story of productive work.
Mira was expressly designed with the convenience of users in mind. In addition to Optima,…
…DGUVcertified safety electronics (PL e) make integration easy.
Fiber to Fiber Coupler Air-cooled (FFC ac)
The air-cooled FFC is designed to handle power levels up to
4.5 kW (CW). Just like the water-cooled coupler, the FFC ac
includes built-in sensors for continuous monitoring of…
HYPER RAPID 20 of 27
1 CPC connecter water in from laser head
2 Laser diodes with fiber coupler
3 Mains power cable (230 VAC, 50-60 Hz)
4 no function
5 Output connecter for emergency exit signal for a superior machine, see section "Emergency Stop connecter" on page 23
1.5 K 2 K
1.5 K 2 K
REAL TIME I/O INTERFACE
Temperature Stabilization Module
VCR Upgrade Kit (VCR gas connections instead of Gyrolok)
Pre-mounted Output Coupler for quick optics exchange, COMPex 100/200
Pre-mounted Rear Mirror for quick optics change, 248 nm
Low-Divergence Optics, 248 nm, COMPex…