Search Results

Refine

Result Type

1 - 12 of 13 Products for 'Db-25 Pin' Page 1 of 2 |

Db-25 Pin

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

COHERENT LaserPowerSensors FlowRequirements FittingSpecs PinAssignments 04-2017mp.pdf

Superior Reliability & Performance
QI-19.140 Rev. AC
Page 6 of 6
Pin Out Info for thermopile DB25 Sensors
Abbreviations: " = inch, ' = foot, GPM = gallons per minute, LPM = liters per minute, PSI = pounds per square inch

COHR DiamondFLQ DS 0218 4.pdf

COHR DiamondFLQ DS 0218 4.pdf

…and full rated power.
6 Typical rise time from 0% to 90% of max. power.
7 Typical fall time from 100% to 10% of max. power.
8 DB25 connector uses industry standard pin assignments.
9 Highest voltage allowable on the +24VDC input when the power supply is intended to be off.

Diamond g50 100 Quiksetup.pdf

Diamond g50 100 Quiksetup.pdf


48 VDC +
48 VDC RETURN
1/4 inch NPT
DB25
PIN 3, ENABLE
PIN 16, GROUND
1/4 inch NPT
PIN 15, GROUND
PIN 12, TEST ENABLE
PIN 7, MOD (+)
PIN 20, MOD (-)
NC
PIN 5, TEST MOD
PIN 18, TEST MOD
DIFFERENTIAL LINE
DRIVER SN75172 OR…

Diamond J-5 Series OEM Lasers Preinstallation Manual, Rev. AC

…Real-time Control
and Status I/O
DB-25 connector (male)
Similar to existing K series OEM interface
(see differences in Table 4-2 on page 4-3).
Table 4-3 on page 4-5
and
Table 4-4 on page 4-6
Extended I/O
DB-25 connector (female).
Contains shutter…

Avia preinstall.book

Avia preinstall.book

AVIA 266 Laser Preinstallation Manual
10
Table 5. EXTERNAL INTERFACE Connector Pinouts
THIS CONNECTOR IS A DB-25 PIN FEMALE (PLUG WITH SOCKETS) CONNECTOR.
PIN DESCRIPTION FUNCTION
1 Analog Ground Analog signal ground reference.
2 Analog Input 1 0 to +5 V. (DO NOT USE)…

COHERENT LMC 2016-2017 Catalog .pdf

COHERENT LMC 2016-2017 Catalog .pdf


CALIBRATION
& SERVICE
Power
& Energy
Meters
Laser
CrossReference
Index
Model
Name
Index
DB-25
Energy
Sensors
USB/RS
Energy
Sensors
DB-25
Power
Sensors
USB/RS
Power
Sensors

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB


Real-time Control
and Status I/O
DB-25 connector (male)
Similar to existing K series OEM interface
(see differences in Table 4-2).
Table 4-3 on page 4-5
and
Table 4-4 on page 4-6
Extended I/O
DB-25 connector (female).
Contains shutter interface…

Diamond J-2 Series OEM Lasers Preinstallation Manual, Rev. AB


Real-time Control
and Status I/O
DB-25 connector (male)
Similar to existing K series OEM interface
(see differences in Table 4-2).
Table 4-3 on page 4-5
and
Table 4-4 on page 4-6
Extended I/O
DB-25 connector (female).
Contains shutter interface…

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC

Diamond J-3 Series OEM Lasers Preinstallation Manual, Rev. AC


Real-time Control
and Status I/O
DB-25 connector (male)
Similar to existing K series OEM interface
(see differences in Table 4-2).
Table 4-3 on page 4-5
and
Table 4-4 on page 4-6
Extended I/O
DB-25 connector (female).
Contains shutter interface…

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA

Diamond J-3-5 Series OEM Lasers Preinstallation Manual, Rev. AA


Real-time Control
and Status I/O
DB-25 connector (male)
Similar to existing K series OEM interface
(see differences in Table 4-2).
Table 4-3 on page 4-5
and
Table 4-4 on page 4-6
Extended I/O
DB-25 connector (female).
Contains shutter interface…

00 E-250 Pre.book

00 E-250 Pre.book

…is applied. This is accomplished by
connecting pin #3 to a RETURN.
Fault reset is required in order to re-establish operation after a
system fault occurs. This is accomplished by opening then reconnecting pin #3 to a RETURN.
This pin should not be used for safety interlock.

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-5V Series OEM Lasers Preinstallation Manual, Rev. AA

…dedicated pins on the
Real Time I/O connector. Terminal faults require an Ethernet
connection to diagnose fully.
Real Time Control
and Status I/O
Description
The control and status signals are summarized in Table 4-3 and are
accessed through the Real Time I/O DB25