Search Results

1 - 12 of 78 Products for 'Dc Power Supply' Page 1 of 7 |

Dc Power Supply

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…required for the purge gas filters.
DC Power Supply Coherent has qualified the DC power supplies listed in "Appendix
E: Accessories and Options" in the operator's manual for use with
the E-400 Series laser systems. These DC power supply recommendations include both air-cooled and…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

supplies from the DC power supply manufacturer.
Coherent can provide the DC power cables that connect the DC
power supply output to the + 48 VDC and 48 VDC return terminals
on the RF power module (see Figure 3-16). These cables come with
standard cable terminals.
DC Power

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

COHR DIAMOND J-3-5 COlaser DS 0617 2.pdf

…kg (99.2 lbs.)
Dimensions (L x W x H) 1064.1 x 198.1 x 227.6 mm (41.89 x 7.8 x 8.96 in.)
ELECTRICAL POWER REQUIREMENTS
DC Input Voltage (VDC) 48 ±1.0%
Continuous DC Current8 (A) <100
Peak Current (A) 200 for 6 ms
COOLANT
Heat Load (kW) 4.8
Dynamic Coolant…

DC Series, CO2 Lasers for Cutting

DC Series, CO2 Lasers for Cutting

…integrated gas bottle eliminates the need for an external gas supply. Up to the power range of 5 kW, the lasers run with a gas consumption of only 0.1 l/h. Furthermore, the energy-saving standby operation leads to minimal power consumption. The DC Series Series control offers extended monitoring and…

COHR DIAMOND C-30 DS 0817 1.pdf

COHR DIAMOND C-30 DS 0817 1.pdf

…mm (14.1 in.)
10X M4
11.4 mm (0.5 in.)
Both Ends
4X M4
15.2 mm
(0.6 in.)
Coolant Supply
Ø 6mm OD
Coolant Return
Ø 6mm OD
DC Power
Connector
Control Connector,
RJ45
MECHANICAL SPECIFICATIONS
Diamond C-30L
Laser Head…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…required for the purge gas filters.
DC Power Supply Coherent has qualified the DC power supplies listed in Appendix C:
Accessories and Options in the operator's manual for use with the
E-1000 Series laser systems. These DC power supply recommendations include both air-cooled and…

COHR DC Series DS 0619web.pdf

COHR DC Series DS 0619web.pdf

DC Series Datasheet
SPECIFICATIONS DC 030 DC 035 DC 040
Nominal Power (W) 3000 3500 4000
Power Range (%) 10 - 100
Laser Beam Quality
ISO 11146, deviation ± 5 %
K (M²) = 0.95 (1.05)
Power Stability (%)
Cooling water T ± 1 K
± 2
Pointing stability…

Industrial Photonics - October 2017

Industrial Photonics - October 2017

…Coherent-Rofin DC 030, the RF power supply is located
within the compact laser head, eliminating the cost and
Figure 3. In a slab discharge laser such as the Coherent-Rofin DC 030, the laser gas is RF-excited by two closely
spaced flat electrodes. The laser power scales approximately…

EnergyMax-RS Sensors

EnergyMax-RS Sensors

powered with a 5V DC input. This power must be supplied through an external power supply plugged into the external power input plug, or for embedded applications with custom circuit boards, this power can be supplied through Pin1 on the RS232 connector. Many customers choose to use their own power

FieldMate

FieldMate

…laser power measurements and laser tuning. Specifications Max. Measurable Power (with thermopile sensor) 29.9 kW Max. Measurable Power (with optical sensor) 99.9 mW Min. Measureable Power (with thermopile sensor) 100 µW Min. Measurable Power (with optical sensor) 10 nW Displayable Full-Scale Power

OBIS Laser Cable (0.3 meter)

OBIS Laser Cable (0.3 meter)

…cable to OBIS Remote for power and communication.
* Single cable from OBIS Remote to OBIS laser for power, modulation, communication and I/O.
* Connect OBIS laser to OBIS Single Laser Remote.
* Power supplied through OBIS Remote to OBIS laser - no need for separate power to OBIS laser.
* Laser head…

OBIS Laser Cable (1 meter)

OBIS Laser Cable (1 meter)

…cable to OBIS Remote for power and communication.
* Single cable from OBIS Remote to OBIS laser for power, modulation, communication and I/O.
* Connect OBIS laser to OBIS Single Laser Remote.
* Power supplied through OBIS Remote to OBIS laser - no need for separate power to OBIS laser.
* Laser head…